Swimming Pool OnLine>> Pool heating and dehumidification Heat exchangers ELECRO VULCAN TITAN mechanical thermostat

ELECRO VULCAN TITAN mechanical thermostat

VULCAN ELECRO TITANE heat exchanger with mechanical thermostat
Recommended retail price 2017 starting from :
1195.20 €
Our Price starting from :
849 € Including VAT
Ref. 011377
ELECRO VULCAN Titan, heat exchanger 25-kW, mechanical thermostat TM
compatible with salt water treatment, features mechanical thermostat
power ranging from 25 to 100 kw,
Made in Great Britian
  • Maximum pool volume 280 m3
  • Single-phase
In stock
ELECRO VULCAN Titan, heat exchanger 25-kW, mechanical thermostat TM
Ref. 011377
EUR 849
849 €
Order Free quote
ELECRO VULCAN Titan heat exchanger, 40-kW, mechanical thermostat TM
Ref. 011378
EUR 889
889 €
Order Free quote
ELECRO VULCAN Titan, heat exchanger 70-kW, mechanical thermostat TM
Ref. 011379
EUR 949
949 €
Order Free quote
ELECRO VULCAN Titan, heat exchanger 100-kW, mechanical thermostat TM
Ref. 011380
EUR 999
999 €
Order Free quote
Outdoor pool water solely heated by the natural energy of the sun, unfortunately, cannot ensure a sufficient temperature to guarantee optimal swimming comfort.

It is for this reason, the solution of heating your pool allows you to obtain a constant pool water temperature throughout the season.

For indoor pools, pool heating is the only way to obtain an ideal temperature for your pool water, whatever the season.

The heat exchanger gives the possibility of using your domestic heating system (gas or oil boiler, heat pump or solar system) to heat your pool water.
The hot water produced by your heating system (referred to as the primary circuit) will circulate through a serpentine situated in the interior of the exchanger, and so, will heat by conduction.

The pool water (referred to as the secondary circuit) will circulate on the surface of the "warm" serpentine, allowing you to reach the desired temperature for your pool water.

The performance of the exchanger is conditioned by the temperature produced by your heating system and the capacity of the exchanger in relation to the volume of pool water.

The exchanger allows you to quickly heat your pool water.

A hydraulic liaison should be fitted between the heating system and the heat exchanger. Only water or water containing a glycol additive are compatible with heat exchangers for pools.

For maximum efficiency, the distance between your heating system and the heat exchanger should be as short as possible to avoid heat loss through piping. If a distance is inevitable, insulation of pipes is recommended.


Details heat exchanger ELECRO Vulcan Titane
The ELECRO VULCAN Titan heat exchanger is an economic solution to heat your pool water in liaison with your domestic heating system. It is equipped with a circulator, mechanical thermostat and flow switch.

- The models featuring a mechanical thermostat TM are equipped with a start/stop button. The mechanical thermostat lets you determine the temperature that you wish for your pool. When the desired temperature is reached, the circulator in the primary circuit stops. These models only operate during the filtration cycle that has been programmed in the electrical box of your filtering unit.

Compatible with salt water treatments.

Pool connection PVC Ø 50 lengthways at filter
Boiler connection Ø1 "BSP
Stainless steel 316 outdoor tube with polyamide supports.
Inside surface of tube TITANIUM, compatible with salt water treatments
Circulator GRUNDFOS.
Palette flow switch.
Non-return valve for primary circuit.
Digital thermostat models MT, 220v..
Full disassembly possible.
Wall or floor anchorage supports

Simplified installation in boiler room, in proximity of boiler, situated at filter outlet

Heating capacity

ModelMaximum volume of pool for primary circuit 90/70°C*Maximum volume of pool for primary circuit 45/35°C*
25 kW60 m330 m3
40 kW120 m350 m3
70 kW200 m380 m3
100 kW280 m3110 m3

Descriptive of the heat exchanger ELECRO VULCAN

Details Elecro
1. Temperature probe
2. Circulator
3. Body of exchanger
4. Digital control box
5. Non-return valve
6. Flow switch

Dimensions elecro
Dimensions of the ELECRO VULCAN titan heat pump

Installation schema
Installation schema for ELECRO VULCAN titan heat exchanger


2 years

Photos non-contractual
Price incl. VAT

Ask for a free quote elecro vulcan titan mechanical thermostat

Other product : ELECRO VULCAN TITAN mechanical thermostat
Starting from 849 eur Including VAT.

Please fill in this form carefully. Our commercial service will handle your request promptly.

UK freephone hotline

Monday Friday 9.00 19.00, Saturday 10.00 18.00