Galvanised steel pool kit 12 x 6m
Galvanised steel pool kit 12x6m h1,10m
Several shapes of bottom surfaces are available for the panels 1,10m in height :
For kits H 1,50m : only a flat pool floor is available
(specific panels that do not have contact with the structure)
- High flow skimmer
- Large skimmer inlet
- Discharge nozzles
- Brush adaptor
- Main drain
- Lighting projectors(s) 300 W
Galvanised steel structure
Panel height 110cm or 150 cm, inserts for sealing parts pre-cut by the manufacturer.
THE ADVANTAGES OF GALVANISED STEEL
Galvanised steel is renowned for its properties of remarkable mechanical strength and is the reason why this material is used in many sectors of the construction industry.
This material is robust and malleable and offers an excellent protection against corrosion. Galvanised steel is often chosen as the construction material used to build supporting frames of bridges, tunnels and buildings.
Our metallic kits are designed using a hot-dip galvanization process, ensuring a long lifespan and exception protection against corrosion. The structure is guaranteed for 25 years against rust perforation.
SELF SUPPORTING STRUCTURE
The structure is constituted using galvanised steel, self-supporting panels. The panels are capable of resisting the pressure of water, without the necessity of completing a landfill around the parameter of the structure. The panels are also totally secure when emptying the pool as the panels support the weight of the surrounding earth.
Installed with ease, you can totally landfill around the pool, install the pool border or add on peripheric borders. You can also envisage a pool design partially in-ground and partially above ground, with no difficulty regarding water pressure resistance.
Detailed view of the swimming pool
1. Galvanised steel panel structure
2. Supporting legs
3. Concrete sealing of supporting leg
4. Peripheric chaining supporting pool border (peripheric concrete beam + reinforcing bars)
5. Reinforcing bars
6. Support plot (concrete block structure)
Main stages of your pool installation:
Following excavation, the structure is assembled, positioned, and levelled. Then sealing is then completed with concrete mixed to 350kg.
The pool floor screed is completed in the pools interior. Filtration parts are positioned and plumbing work is carried out.
The supporting plots needed to install the peripheric chaining is completed. Landfill surrounding the panels and position the liner rail. Complete the peripheric chaining. Install the pool border. Install the pool floor underfelt followed by the pool liner. Fill with water.
The filtration of your pool
Our galvanised steel pool kits are available with a choice of two water filtration systems.
An outboard filtration systems means you do not require a technical shelter or underground service piping and you do not put residual chemical waste back into the water system. Practical, this system limits installation work.
A traditional filtration system is composed of a sand filter, a self-priming pump, and electrical distribution box with cables, various valves, collectors and u-bends, PVC piping and PVC glue. This evolving system is more economical when purchasing, and all the material is contained on one, protected transportation pallet.
Filtration monobloc, without technical shelter
B. Electrical box + Programmation control
C. Filter pump
D. Two removable filter cartridges with collector baskets.
E. Balneotherapy (Air regulator knob).
F. Skimmers, two openings creating suction inlet.
G. Adjustable discharge nozzle
H. LED lighting feature
Filtration pump with a motor capacity of 1,1kW
Water flow 25m³/h
Featuring two removable polyester filter cartridges
Filter surface 9m2
Filter capacity 25 microns
Bodywork ABS – PMMA thermoformed
Electrical distribution box with 30 mA circuit breaker
To learn more please consult Filtrinov MX25 filtration monobloc
Classic sand filtration system
Sta-Rite 5P2R, 1,5hp,
Bodywork made from fiberglass reinforced synthetic material
Easy to care for
Very quiet operation
2 year guarantee
Astral Cantabric made from inalterable plastic resistant to chemical and atmospheric agents
Astral pool 6-way selection valve 1/2",
Bayonet closure for the following operations : wash, rinse, recirculate, purge closing and winterizing (all inlets and outlets communicate).
Distribution box and cables
Protection index IP55
With fuse, timeclock, and magneto-thermic trip switch
For pump + lighting projector
2 discharge nozzles
Plumbing parts for technical shelter à maximum distance of 10m from pool
PVC kit includes :
- 5 1/4 turn valves
- Pipe bends
- T connections
- Union connections
- Rigid PVC pipes, withstanding 16 bar pressure
- Sealing compound
Composition of Kit
Liner, 75/100, mono colour, made to measure, guaranteed for 10 years, (digressively concerning welded points), 7 standard colours (border or impression available on option).
Liner rail "Hung" using self-piercing screws. Pool floor anti-rotting underfelt 350 g/m2, supplied with specific glue.
Important : it is indispensable to check the installed pool dimensions BEFORE ordering your liner
|Anthracite ALKORPLAN 2010||White||Blue France||Pale blue|
|Grey ALKORPLAN 2010||Sand||Byzantin blue||Byzantin green|
|Persian blue||Persian blue grey||Persian green||Persia old rose|
|Marble blue||Marbre grey||Marble sand|
|Carthage blue||Carthage green||Genova grey blue||Florentine grey blue|
|Olympia blue||Olympia green||Oxford blue||Oxford grey blue|
|Mallorca blue||Mallorca sand|
The panels are precut by the manufacturer taking into account the position and dimensions of the sealed filtration equipment such as the skimmer, the discharge nozzles, brush adaptor and projector(s).
This system is totally specific to an aquatic environment and ensures that water is not in contact with the steel panels.
The sealed parts overlap the pool structure, ensuring no contact between the pool water and the pool structure.
Elegance 400 from WELTICO has a modern, elegant design. The skimmer features a wide water inlet (opening 200 x 400) and is equipped with an outlet connection that links a water level regulator if desired (available on option).
2. Brush adaptor
PVC ASTRAL POOL complete with o-rings, sealing clamp and screws. Diameter 50mm.
3. Discharge nozzle
PVC ASTRAL POOL with adjustable ball joint and adjustable diameter of discharge. This equipment ensures the return of filtered, treated water to your pool.
4. Main bottom drain
Projector 300 W/ 12V and its connection box.
- Excavation plan (must be scrupulously respected)
- Installation guide
- Maintainance and use guide
DOM COMPOSIT reinforced acrylic
To facilitate access to the pool and create a relaxation zone, the step designed in DOM COMPOSIT reinforced acrylic is the ideal solution. You can position your steps on the length, width or corner angle of your pool.
Easy to install, the step module takes the place of one or several panels of the pool structure. The liner is clamped on the front of the steps, avoiding un-esthetic folds and a slipping hazard.
Reinforced acrylic indicates the steps are very resistant, do not scratch, do not chip and are not affected by varying temperatures, chlorine or UV. An anti-slipping treatment is applied to the steps and is tinted in the mass.
The steps are supplied with a spare discharge nozzle and have a 10-year guarantee. The step option cancels the supplied ladder.
The choice of 6 colours can adapt to the majority of pool liners.
We can supply steps with various colours, dimensions and heights, so you can find the perfect solution to fit your operational and esthetic pool criteria.
To find out more about our range of Dom Composit products click on the following link
DOM COMPOSIT acrylic steps
25 years on the structure against perforation due to rust
Price incl. VAT
Ask for a free quote galvanised steel pool kit 12 x 6m
Other product : Galvanised steel pool kit 12 x 6m
Starting from 9854 eur Including VAT.
Please fill in this form carefully. Our commercial service will handle your request promptly.
UK freephone hotline
Monday Friday 9.00 19.00, Saturday 10.00 18.00