Swimming Pool OnLine>> Pool heating and dehumidification Dehumidifiers for pools Dantherm CDP 65 built-in dehumidifier

Dantherm CDP 65 built-in dehumidifier

Dantherm CDP 65 built-in dehumidifier
Recommended retail price 2017 starting from :
6840 €
Our Price starting from :
6160 € Including VAT
Ref. 007508
DANTHERM CDP 65 T built-in dehumidifier
In stock
DANTHERM CDP 65 T built-in dehumidifier
Ref. 007508
EUR 6160
6160 €
Order Free quote
DANTHERM CDP 65 T built-in dehumidifier with hot water battery
Ref. 007507
EUR 6590
6590 €
Order Free quote

Key functions

The CDP range of ducted dehumidifiers has been specially designed for dehumidification in commercial pools and spas, in larger private pools and any other aggressive environment where high capacities are required to control the humidity.

Dehumidifiers draw moist air in over a cold evaporator where the air is cooled to temperature below the dew point. The air returned is cool and dry. The temperature of the dehumified air extracted by the blower rises approximately 5°C.

The Dantherm CDP 45 is an entirely automatic dehumidifier. It is very silent and commanded by integrated hygrostat. An LCD screen indicates clearly the functioning mode. Very easy maintenance.
Fitted dehumidifier

2.9 L/h
Air flow
750 m³/h
1650 W
Absorbed power *
1.30 KW
Power supply
Absorbed intensity
7.2 A
Noise level (distance 1m)
48 dBA
Refrigerant fluid
Dimensions (HxLxP)
680 x 1735 x 3290 mm
Grids and girdles
95 Kg

*Under nominal conditions: water 28°, air 28 °C, hygrometry 65%
Le Dantherm CDP 45 is to be installed at two meters distance from the pool with respect of the C.15.100 standard. The heating system is optional and can be integrated (hot water battery). Humidity control for interior pools by closed circuit dehumidification.

Wall mounted.
Optional. Hot water battery.

At temperatures under 20°C the evaporator may start to ice up. The evaporator sensor registers the icing up so the compressor is stopped and the unit switches over to defrosting. Defrosting takes place by warm room air being blown onto the evaporator by the two fans whereby the ice on the evaporator is melted.
When the evaporator sensor registers that there is no more ice on the evaporator, the compressor starts again. The hygrostat relative humidity is preset by the manufacturer at 60%. Electronic control panel indicates different unit modes:
1. The unit is connected to the mains.
2. Dehumidification - the compressor is working.
3. Refrigerant circuit is out of order - the unit is turned off.
4. The hot water battery is connected (only for the models with hot water battery)


2 years

Photos non-contractual
Price incl. VAT

Ask for a free quote dantherm cdp 65 built-in dehumidifier

Other product : Dantherm CDP 65 built-in dehumidifier
Starting from 6160 eur Including VAT.

Please fill in this form carefully. Our commercial service will handle your request promptly.

UK freephone hotline

Monday Friday 9.00 19.00, Saturday 10.00 18.00


Spare parts order

You are looking for a spare part for «Dantherm CDP 65 built-in dehumidifier» ?

Please click the button below. Our commercial service will handle your request promptly.