Pool heat pump Zodiac EDENPAC 3 LT

Delivery fees free **
Price starting from just
Consult us
Pool heat pump Zodiac EDENPAC 3 LT, details :
Operates at ambient temperatures down to +5°CKey functions
| Heat pump PSA Edenpac LT 3 air/water for swimming pools. Edenpac 3 LT is to be installed in the technical room together with Integrated Forced-Air Ventilation System including two fans sucking the air from outside and blowing out cold air. 2 adapters and a 3m isolated, flexible exhaust air duct. Operates at ambient temperatures down to +5°C. Connection kit included with the pump. | ![]() |
Components :
- Rotary SCROLL compressor
- Thermostat with LCD screen
- Water flow controller
- Titanium exchanger life warranty against corrosion
- Conform to European standards
- Refrigerant fluid R407C (according to the law requirements)
Condensation drain is to be traced in the technical room that should go into a drain trap.
| Heating output* | 12kW |
| Energy input* | 2,60kW |
| COP** | 4,62 |
| Maximum pool volume | 60 to 85 m³ |
| Average water flow | 5m³/h |
| Pressure drop | 1,3 |
| Hydraulic plumbing | 1/2 unions PVC Ø50 |
| Air flow (m³/h) | 2500 |
| Voltage | 230V/50Hz ou 400V/50Hz |
Mono-phase model
| Voltage | 230V / 50Hz |
| Absorbed intensity | 13,8 A |
Three-phase model
| Voltage | 400V / 50Hz |
| Absorbed intensity | 6,6 |
* Private pool with insulated cover, from May to September, Air at 15°C, according to climate zone.
** Coefficient of performance = Heating output / Energy input

Heat pump dimensions EDENPAC 3 LT

Heat pump installation diagram EDENPAC 3 LT
| 1. Suction fan, outside air, 500 x 500 mm 2. Water treatment 3. By-pass 4. Pump 5. Filter | 6. Return inlet 7. Suction 8. Flexible insulated exhaust cold air duct, diam. 500 x 500 mm 9. Warm air 10. Cold air |
Warranty
2 years
Actual products may vary from images shown
Prix TTC.
Ask for a free quote : Pool heat pump Zodiac EDENPAC 3 LT
Please fill in this form carefully. Our commercial service will handle your request promptly.





