Swimming Pool OnLine>> Pool equipment Pool lighting, projectors and bulbs... Weltico Diamond Power Design LED lighting projector without alcove

Weltico Diamond Power Design LED lighting projector without alcove

Weltico Diamond Power Design LED lighting projector without alcove
Recommended retail price 2017 starting from :
199.75 €
Our Price starting from :
105 € Including VAT
Ref. 012764
DIAMOND POWER DESIGN 6 LED white, projector without alcove
Pool projector 6 or 12 LED
Designed for pools under renovation,
Easy installation in standard PAR-56 alcoves,
Powerful beam,
Low energy consumption,
White light
In stock
DIAMOND POWER DESIGN 6 LED white, projector without alcove
Ref. 012764
EUR 105
105 €
Order Free quote
DIAMOND POWER DESIGN 12 LED white projector without alcove
Ref. 012765
EUR 139
139 €
Order Free quote
Remote control + on/off box pack for WELTICO Diamond Power LED bulb
Ref. 017796
EUR 66
66 €
Order Free quote
Made in France, the Weltico Diamond Power Design LED projector without alcove has been designed for pools under renovation. Compatible with PAR56 characteristics, this is the perfect replacement for old projectors that have high energy consumption. More economic than a classic bulb, the Diamond Power Design consumes only 28W. Available in 6 or 12 LED's, diffusing an intense, homogeneous white light throughout the pool.

Main advantages



- Specifically designed to replace the existing projectors in your pool.
- Supplied with a set of long clips to adapt to all alcoves.
- Supplied with an extra cable gland, adapting to all types of cables.
- Easy to install.
- Can be controlled at a distance by the Weltico universal remote control

The Weltico Diamond Power LED without alcove in detail



Diffusion of beams


Each LED bulb features polycarbonate focus, amplifying and optimising the diffusion of the beam. This creates a homogeneous and equally distributed light in length and width, as to limit shaded zones.

Sealing


To guarantee total sealing, the LED bulbs and their focus is sealed in resin.

Energy savings



The Diamond Power Design LED bulbs guarantee excellent lighting performance, allowing you to economise up to 80% of energy. Their lifespan is 50 to 100X greater than that of a classic bulb.

Operation

Weltico Diamond Power Design LED lighting projector without alcove<br />


The LED Diamond Power Design is commanded by a start/stop button. The projector can equally be controlled at a distance by the Weltico universal remote control (on option).

Commanding your pool lighting at a distance



The Diamond Power Design projectors without alcove can be controlled at a distance by using the Weltico Universal remote control and its transmitter (available on option).

This allows you to switch on or off your projectors at a distance of up to 50m.
Using carrier-current technology, the Weltico remote control creates no interference with other electrical equipment in the pool area.

Electrical connections


The transformer


The transformer on which the LED is connected must have a secondary distribution voltage of 12v.

The power supply should be adequate to the requirements of the projectors to be connected. The supply should be 10% greater than the power consumed by the projector.

The below table indicates the number of projectors that a transformer, depending on its capacity

Capacity of transformerMaximum number of projectors 6 LEDMaximum number of projectors 12 LED
50VA1-
100VA31
300VA105

Cable sections


Remember weak currents, short cables, poor connections, oxidised wiring and poorly tightened lugs can be the cause of voltage drops.

Measure the power supply at the end of the cable section (minimum required power supply: 10,5V / maximum power supply : 13,5V).

Please refer to the below table to define the required cable section depending on the length and available power supply (table refers to the connection of one projector).

Diamond Power 6 LED

Cable section
Maximum length
2 x 2,5mm2
13m
2 x 4mm2
21m
2 x 6mm2
31m
2 x 10mm2
52m
Diamond Power 12 LED

Cable section
Maximum length
2 x 2,5mm2
8m
2 x 4mm2
12m
2 x 6mm2
19m
2 x 10mm2
32m


Installation of LED bulb with remote control (on option)


A
Transformer power source : 230 volts
B
Transformer power outlet : 12 volts
C
Regulation module, remote control receptor
D
Bulbs (4 maximum)
Installation schema Weltico Diamond Power Design LED lighting projector without alcove


Technical features



ProjectorDiamond Power 6 LEDDiamond Power 12 LED
Power supply12V AC 50Hz/60Hz12V AC 50Hz/60Hz
Power consumed16W30W
Maximum lumens1100lm2050lm
Number of LED's612
ColourWhiteWhite
Index of protectionIP68IP68
OriginFrenchFrench


Technical features of the Weltico universal remote control


Carrying range
50 m
Electrical supply
CR20323V
Frequency
433.92 MHz
Power supply
230V, 50 HZ
Maximum charge
1000W /5A
Weltico universal remote control
Weltico universal remote control


Dimensions of the Weltico Diamond Power Design LED lighting projector without alcove
Ref
Dimensions
Ref A
Ø280mm maximum (concrete) Ø230mm maximum (liner, shell) Ø180mm minimum
Ref B
297mm
Ref C
11mm maximum
Ref D
Flange
Ref E
300mm
Ref F
212mm minimum inner measurement
Ref G
120mm minimum

Packaging contents


- 1 lamp LED
- 1 casing
- 1 connector with cable gland
- O-rings and sealing flange
- 1 packet of screws
- 1 installation instruction sheet


Warranty

2 years

Photos non-contractual
Price incl. VAT