Weltico Rainbow Power Design LED projector
RAINBOW POWER DESIGN12 LED COLOURED LIGHTING PROJECTOR (RGB)- panel
Easy installation and removal of bulb,
Powerful focus beam,
Low energetic energy consumption,
The projectors are delivered with their specific alcove, chosen to correspond to the pool type (sheeted panels, concrete-liner...).
- Multicoloured lamp equipped with 12 LED's.
- Compact alcove (135mm).
- Installation and removal of the bulb without the use of tools.
- Available for sheeted panel and concrete/liner pools.
- Available colour for outer casing - white.
• Excellent lighting quality that can make up to 80% energy economies.
• Lifespan 50 to 100 times more than a filament bulb.
Diffusion of light
Each LED bulb features a polycarbonate focus, optimising diffusion in width and depth.
LED bulbs and their focus are sealed in resin to guarantee absolute water tightness.
The projector colours are obtained by mixing the 3 primary colours - red, green and blue.
This projector is independent and offers the choice of 5 modes : 10 static colours and 5 automatic sequences to change colour so you can evolve your lighting atmosphere by the simple press of a button.
A radio remote control is equally available on option with a regulating control box.
Remote control and regulating control box (option)
The projector features an integrated RF (Radio Frequence) receptor that can respond to a signal up to 50m away on clear ground. Its specific frequency ensures there is no interruption with the other household appliances.
The remote control commands the regulating control box for colour change and start/stop of the projector.
5 buttons :
- 1 stop button.
- 2 buttons for colour projection.
- 2 buttons for sequenced projection.
Regulating control box
The regulating control box is connected to the supply cable of the projectors after the transformer.
This offers command of up to 4 coloured projectors on a 25m maximum length of cable.
The signal is sent via the projector power cable.
The transformer on which the LED is connected must have a secondary distribution voltage of 12v.
The power supply should be adequate to the requirements of the projectors to be connected. The supply should be 10% greater than the power consumed by the projector.
The below table indicates the number of projectors that a transformer, depending on its capacity.
The cable section must be adapted to the distance between the transformer and projector to avoid all risk of overheating or loss of power.
Required sections for connection
|Projector||Rainbow Power Design 12 LED liner-concrete||Rainbow Power Design 12 LED panel|
|Power supply||12V AC 50Hz/60Hz||12V AC 50Hz/60Hz|
|Number of LEDs||12||12|
|Side||Rainbow Design Concerete/liner||Projecteur Rainbow Design sheeted panel|
|A||Ø 265 mm||Ø265 mm|
|B||265 mm||265 mm|
|C||265 mm||265 mm|
|D||135 mm||135 mm|
|E||16 mm||16 mm|
|F||Ø 232 mm||Ø 262 mm|
|G||Ø 211||Ø 248.5 mm|
|H||Ø 6mm||Ø6 mm|
Contents of package
- 1 LED lamp
- 1 alcove
- 1 outer casing
- 1 connector with cable gland
- O-rings and flange
- 1 packet of screws
- 1 duct + electrical cable
- 1 technical sheet
Price incl. VAT
Ask for a free quote weltico rainbow power design led projector
Other product : Weltico Rainbow Power Design LED projector
Starting from 299 eur Including VAT.
Please fill in this form carefully. Our commercial service will handle your request promptly.
UK freephone hotline
Monday Friday 9.00 19.00, Saturday 10.00 18.00