Sol+Guard bubble cover
Sol+Guard GeoBubble thermal bubble cover 500 microns Eco
Polyethylene, 500 microns,
Clear upper surface with translucent tinted bottom
Compatible pool shapes
Stair cut supplement : 41.00 €
Ladder cut supplement : 41.00 €
Technical features of the cover
To optimise your swimming season it is important to cover your pool water with a "bubble cover", as to avoid heat loss and evaporation. A bubble cover is the perfect partner to complement your pool heating system.
Sol+Guard features the qualities of a summer cover and in addition, heats your pool water when exposed to the sun. You can enjoy your pool, for longer.
Combined with a heating system, the Sol+Guard cover lets you reach and conserve the temperature you desire so you can save money, use solar energy free of charge and swim for longer!
Pool covers and pool finishes work in hard conditions : ultra-violet rays, chemical exposure, deterioration due to heat... All of these combined conditions can reduce the covers lifespan.
Due to their shape, classic bubble covers (1) are subject to chemical attack (a). Pointed angles form a fragile zone (b) reducing lifespan. Their small size limits air dilation(c).
With harmonised shape and equal depth (A), the GeoBubble (2) is more resistant to chemical attack (B) and ultraviolet rays (C) often responsible for early deterioration.
The deep volume of bubbles (D) reinforced with a double finish (E) gives GeoBubble a superior resistance to air distillation.
What is Sol+Guard?
Constituted using a double layer technique. The outer surface is transparent, the inner surface is a of a translucid tint, giving a better penetration for solar energy to enter your pool water.
The materials used for the manufacture of the Sol+Guard cover resist to even the most variable climatic conditions.
Additives used during manufacture contain pigments which are chemical and weather resistant, creating high-performance stability in sunlight.
The advantages of Sol+Guard
Heightens water temperature using solar energy
Manufacturer's tests show that the greater the translucid surface of a cover, the greater the capacity of solar penetration in the pool water.
Using a very clear colour and a unique, two layered combination, the Sol+Guard pool cover stores a maximum of solar energy when passing through the cover.
This system raises your water temperature (up to 8°C).
Reduces the use of chemical products
Gains heat using solar energy
Using a Sol+Guard cover reduces chemical use up to 40%. We do, however, recommend you continue to follow the manufacturer's instructions.
Evaporation of water in the pool
The Sol+Guard pool cover means you eliminate more than 98% of water evaporation from your pool water, therefore, reducing your water consumption and your bills.
Research carried out in Great Britan has proved that pool water evaporation in an average sized pool (approx 4m x 8m) is equal to 32 000 litres a year, the equivalent to 400 pools !
These indicative figures can rise in regions with higher than average temperatures, also during high winds.
Less debris contaminating your pool water
Eliminates more than 98% of water evaporation
Debris such as leaves, dust and insects are not only disagreeable to look at but also represent a breeding ground for algae and bacteria. When your pool is covered, these elements which contribute to pool contamination stay out of your pool water and greatly improve its quality and appearance.
Reduces energy consumption by 70%
The Sol+Guard cover reduces water evaporation and the cost of heating your pool by means of sun rays.
Heat gain tests effectuated by the manufacturer have proved that the use of the Sol+Guard cover makes close to 70% of economies in energy consumption. This applies to heat pumps and electrical heaters.
Another important point is that the use of this cover reduces by half the number of solar panels needed to heat a pool when not using a cover.
Environmental economy and advantages
Gaining and holding heat
The Sol+Guard cover allows you to economise money by reducing your expenditure on water, heat and maintenance products. Your investment in a Sol+Guard cover can be amortised in only one year.
By reducing the volume of energy needed to heat and filter your pool water, the Sol+Guard cover equally allows you to lower your carbon footprint. This preserves water and at the term of its lifespan is completely recyclable.
Our models of isothermal pool covers
Unhemmed ECO model
The most economic solution
This model features a clean cut finish, un-hemmed without a border.
Made from "honeycomb" polyethylene with anti-UV treatment.
Fixation rings dispatched widthways on the cover (8 max).
Each pool cover is thermo-soldered, made to measure at the manufacturer's workshop.
Not supplied with protective cover.
Guarantee : 1 summer season.
DUO model - double reinforcement
Excellent value for money
Made from polyethylene honeycomb with anti-UV treatment.
Reinforced by polyethylene hemmed borders sewn on two lengths. Fixation rings at each angle, + on the same side of the storage reel, positioned at 70 to 80cm intervals depending on the width of the pool.
The DUO model is supplied with a protection cover complete with two attaching bungees.
Guarantee : 4 digressive summer seasons.
QUATRO - 4 reinforcements
Made from "honeycomb" polyethylene with anti-UV treatment
Totally reinforced by polyethylene hemmed borders sewn on the four sides of the cover
Made from "honeycomb" polyethylene with anti-UV treatment with fixation rings at each angle + on the same side of the storage reel, positioned at 70 to 80cm intervals depending on the width of the pool.
The Quattro model is supplied with a protection cover complete with two attaching bungees.
Guarantee : 4 digressive summer seasons.
Precautions to follow when using your bubble pool cover
It is imperative to rigorously follow all the below recommendations to benefit from the guarantee.
The bubble side of the pool cover must be in contact with pool water, the smooth side must be visible.
To preserve the lifespan of your bubble pool cover, it is imperative to remove it when:
- The ambient temperature reaches 30°C.
- During a chlorine shock water treatment for your pool and during the following 48h. (The chlorine content of your pool water must not exceed 1PPM).
When you remove your cover from your pool (the use of a reel is strongly recommended) :
- You MUST protect your pool cover from sun rays with a protective cover.
- If you do not have a pool cover storage reel it is recommended to fold the pool cover several times or roll to store under a protective cover.
Expansion and contraction :
- Because of variable ambient temperatures, the dimensions of the pool cover can vary. This is the reason why a safety margin of 1% to 2% is calculated during conception.
So, you may find the dimensions of your pool cover may be slightly different from those of your pool.
- The guarantee of a defective product is applied after analyse and verification by the manufacturer following the return of the product.
- Transportation costs to return the product to the manufacturer are not covered by the guarantee.
- Products which are damaged during transport are not covered by the guarantee. It is the clients responsibility to check the material on reception and formally note any abnormalities with the transporter or refuse the merchandise.
- The manufacturer reserves the right to decide if a product should be repaired or replaced.
EXCLUDED FROM THE GUARANTEE
- The non-respect of the installation and user instructions of the pool cover resulting in abnormal degradation of the material.
- All modification of the pool cover other than those given by the written consent of the manufacturer.
- Deterioration due to the use of cleaning products other than those recommended.
- Consecutive deterioration due to meteorological conditions: violent winds, snowfall, heavy hail, lightening strikes.
- Deterioration due to abnormal rubbing, abrasive pool borders or concaved pool borders that present an uneven water surface.
Deterioration due to rubbing, snagging, tearing, unadapted water treatment and the covers colour stability is equally excluded from the guarantee.
1summer season for the ECO model.
4 digressive summer seasons for the DUO and QUATRO models.
Price incl. VAT
Ask for a free quote sol+guard bubble cover
Other product : Sol+Guard bubble cover
Starting from 6 eur Including VAT.
Please fill in this form carefully. Our commercial service will handle your request promptly.
UK freephone hotline
Monday Friday 9.00 19.00, Saturday 10.00 18.00