Made to measure bubble cover

Made to measure bubble cover
Recommended retail price 2017 starting from :
5.80 €/m²
Our Price starting from :
4.40 €/m² Including VAT
Ref. 007855
Blue bubble cover 400 microns
Thermal polyethylene pool cover,
400 or 500 microns,
blue, blue/silver, blue/black
ECO, DUO or QUATRO finish
In stock
Blue bubble cover 400 microns
Ref. 007855
EUR 4.40
Price starting from
4.40 €
/m²
Order Free quote
Blue bubble cover 400 micron silver downside basic finish with eyelets
Ref. 007858
EUR 5.09
Price starting from
5.09 €
/m²
Order Free quote
Blue bubble cover 500 microns ECO
Ref. 017971
EUR 5.79
Price starting from
5.79 €
/m²
Order Free quote
Blue/black bubble cover 500 microns ECO
Ref. 012656
EUR 5.79
Price starting from
5.79 €
/m²
Order Free quote
Our bubble covers are made to measure, adapting perfectly to your pool.

Detail of price per m²*


Model
400 microns
Model ECO basic cutModel DUO 2 hemsModel QUATRO 4 hems
Blue4.40 €5.79 €6.09 €
Blue - silver downside5.09 €6.39 €6.99 €

Model
500 microns
Model ECO basic cutModel DUO 2 hemsModel QUATRO 4 hems
Blue5.79 €7.39 €7.89 €
Blue- black downside 5.79 €7.39 €7.89 €


Stair cut package : 41.00 €
Non standard stair cut package( >3.00 m) : 50.00 €
Ladder cut package : 36.00 €

*Our prices are inclusive of VAT/m², for pool covers measuring over 10 m² in shape A : oval, rectangular or round.
Other shapes: supplement + 20%. - For pools under 10m², supplement + 25%.

For the precise manufacturing of your pool cover, you need to communicate to us the shape and inside dimensions of your pool.

Made to measure QUATRO bubble cover
Blue/silver model 400 microns 4 sided hem

Shapes of pools



Shape A
Shape A : Made to measure, adapts to all pool shapes. Our price corresponds to a cover for a standard shaped pool : Oval, rectangular or round (a).
Shape B
Shape B : for non-standard pool shapes : lazy, kidney, polygon, trapeze, eight-shaped, cut angled or free form anticipate a supplement of 20%. For pools under 10m², supplement + 25%

Available colours and thicknesses


Blue cover

A. Blue cover 400 or 500 microns


Classic, this cover is chosen principally for thermal insulation.
Blue/black cover

B. Blue/black cover 500 microns


The Blue/black cover strengthens the opacity of the cover. The black downside is in contact with the water, the blue side is visible and the sun rays are blocked. This cover gives a good insulation but must be removed in order for the pool water to be heated by the sun's heat.
This cover is recommended for areas that are very exposed to sun rays as it limits photosynthesis and fast development of algae.

Available thickness of covers


Spacer20 400 micron cover : Standard model.
Spacer20 500-micron cover : More robust, allowing a better thermal insulation and longer lifespan.

Our range of isotherm made to measure covers


Cover made from polyethylene 400 microns or 500 microns. Soldered assembly, sewn hems. Eyelets at each angle + eyelets reel-side 70 to 80cm apart, depending on the width of your pool (depending on chosen model).

Spacer 250

ECO model, unhemmed


The most economic solution

Basic cut model, without hems, in honeycomb core polyethylene with anti-UV treatment.
Eyelets positioned over the cover width (8 maximum).
Assembly soldered made to measure by the manufacturer to the exact pool measurements.
Delivered without protection cover.
Spacer 250

DUO model, 2 hems


Good value for money
Made from honeycomb core polyethylene with anti-UV treatment.
Hems constituted from 2 polyethylene bands stitched on the covers 2 lengths Eyelets at each angle + eyelets reel-side 70 to 80cm apart, depending on the width of your pool.
Each cover in this range is supplied with a protection cover and attaching bands.
Spacer 250

QUATRO model, 4 hems


Fully reinforced

Made from honeycomb core polyethylene with anti-UV treatment.
Polyethylene reinforcement is sewn around the whole perimeter. Eyelets at each angle + eyelets reel-side 70 to 80cm apart, depending on the width of your pool.
Each cover in this range is supplied with a protection cover and attaching bands.

Eco model of bubble cover
Spacer 250
Duo model of bubble cover
Spacer 250
Quatro model of bubble cover

Reinforced bubble cover
Ultra resistant sewn hems

Cuts DUO and QUATRO


Spacer20Covers can be made for cut angled pools, rather than a radius or right angle < or = 20 cm.
Unless otherwise stated : steps situated at the end of the pool and ladder situated on the side of the pool : making one with the central, soldered cover.
Eyelets positioned on the length opposite the stairs.

Supplied accessories


Isotherm covers DUO and QUATRO are delivered with a protection cover with anti-UV treatment and fixation bands , to protect your cover when positioned on its reel

Why use a bubble cover ?


During daytime hours, the sun heats your pool water.
After pool use put cover is in position, (smooth side upwards). Your cover limits heat loss and evaporation of water. A cover is also protection against leaves, debris and dust.

Precautions when using a bubble cover


It is imperative to strictly follow all of the given recommendations to fully benefit from guarantees.

Installation advice

Place the bubble side directly in contact with the water surface, so the smooth side is completely visible.

Maintenance

To preserve the lifespan of your blister pool cover, it is imperative to remove it when:
- The ambient temperature reaches 30°C.
- During a chlorine shock water treatment for your pool and during the following 48h. (The chlorine content of your pool water must not exceed 1PPM).

When you remove your cover from your pool (the use of a reel is strongly recommended) :
- You MUST protect your pool cover from sun rays with a protective cover.
- If you do not have a pool cover storage reel it is recommended to fold the pool cover several times or roll to store under a protective cover.

Expansion and contraction :
- Because of variable ambient temperatures, the dimensions of the pool cover can vary. This is the reason why a safety margin of 1% to 2% is calculated during conception.
So, you may find the dimensions of your pool cover may be slightly different from those of your pool.

GENERAL CONDITIONS

- The guarantee of a defective product is applied after analyse and verification by the manufacturer following the return of the product.
- Transportation costs to return the product to the manufacturer are not covered by the guarantee.
- Products which are damaged during transport are not covered by the guarantee. It is the clients responsibility to check the material on reception and formally note any abnormalities with the transporter or refuse the merchandise.
- The manufacturer reserves the right to decide if a product should be repaired or replaced.

EXCLUDED FROM THE GUARANTEE
- The non-respect of the installation and user instructions of the pool cover resulting in abnormal degradation of the material.
- All modification of the pool cover other than those given by the written consent of the manufacturer.
- Deterioration due to the use of cleaning products other than those recommended.
- Consecutive deterioration due to meteorological conditions: violent winds, snowfall, heavy hail, lightening strikes.
- Deterioration due to abnormal rubbing, abrasive pool borders or concaved pool borders that present an uneven water surface.
Deterioration due to rubbing, snagging, tearing, unadapted water treatment and the covers colour stability is equally excluded from the guarantee. ]

Warranty

2 digressive summer seasons

Photos non-contractual
Price incl. VAT

Ask for a free quote made to measure bubble cover

Other product : Made to measure bubble cover
Starting from 4.40 eur Including VAT.

Please fill in this form carefully. Our commercial service will handle your request promptly.


UK freephone hotline

Monday Friday 9.00 19.00, Saturday 10.00 18.00

UK freephone hotline


 

Spare parts order

You are looking for a spare part for «Made to measure bubble cover» ?

Please click the button below. Our commercial service will handle your request promptly.