Aquabot Bravo electric pool cleaner
Aquabot Bravo electric pool cleaner
Cleans the bottom and wall surfaces of pool and waterline
Aquasmart fast cycle cleans in 1h30
Includes high-density PVA brush and transportation trolley
Aquabot Bravo electric pool cleaner in detail
The Aquabot Bravo pool cleaner is a reference in terms of pool cleanliness. Performant and economic, featuring last generation, high rotation speed 24V motors, associating efficiency with dependability.
It's developed program optimises the trajectory of the unit during its cycle, complete with an anti-blocking system allowing an automatic change of direction (avoiding overheating and lengthening lifespan).
The Aquabot Bravo pool cleaner sucks and filters debris and dirt, climbs the pool walls and cleans the waterline. Efficient for all pools up to a maximum dimension of 12x6m.
Using the Aqua Smart system, your pool is cleaned in 1h30. The high-density PVA brushes combine long lifespan and adhesion.
The included transportation trolly allows easy portability of the Aquabot Bravo and the possibility to store the unit without its brushes touching ground level.
The PVA brushes prove to be more resistant than classic PVC brushes and can adapt to a rough surface, with a longer lifespan.
Using a Dacron bag that has filtering power close to 2 microns, even the finest particles are captured, complementing the filtering action of the pool, therefore reducing the amount of chemical water treatment products used.
Aqua Smart system
Most traditional pool cleaners need 3 to 6 hours to effectuate the same cycle.
The Aquasmart system is an evolved program integrated to the cleaner's microprocessor. The result is a systematic movement of the unit throughout your pool without wasting time.
This technology indicates a number of advantages:
- Fast cleaning
- Economy of energy
- A longer lifespan with less wear and tear on mechanical parts
Easy to use
The Aquabot Bravo is driven by economic, 24V motors.
Totally independent, it works without being connected to your pool filtering system. No specific installation requirement or program check required with minimum maintenance.
Instructions for use: Place the cleaner in your pool (firstly, immersing in the pool water, held by the handle to evacuate air), plug in and start cleaning cycle! When it's work is finished the Aquabot Bravo switches off automatically!
Aquabot Bravo pool cleaner(1), low tension current transformer (2), Robot Aquabot Bravo motor block(3), Ultrafine 2 microns filter bag on its support (4).
Pool cleaner complete with protection system
If the unit is put into action out of the water, the automatic security mode protects the whole of the unit including pump and current transformer... If the low current transformer is put into use without the pool cleaner it is automatically stopped after 10 to 15 seconds.
For pools featuring an immersed border (or a Californian border), the pool cleaner inverses its movement as soon as it emerges when reaching the waters edge. In the case that the unit does not return into the water, it automatically goes to security mode, (including its low current transformer).
If the cleaner meets an obstacle in its path (ladder, lamp, discharge nozzle, pool cover or any other horizontal or vertical object) the cleaner is programmed to move around the obstacle in question and continue its cycle.
If an obstacle becomes stuck between the body of the unit and it's brush (towel, cable...), the unit will try to distance the object in question to continue its cycle. If this fails, the pool cleaner (including its transformer) will adopt security mode automatically.
If the pool cleaner turns over and cannot continue its movements, the pump will operate for 5 seconds. The drive system will forward/reverse and then go to security mode.
Intelligent pool type detection system
The Aquabot Bravo uses a microprocessor programmed with an algorithm studied to protect and optimise its use. From the moment it is switched on, the cleaner will detect the walls and waterline, defining the profile of the pool it will clean. The intelligent algorithm will optimise the cleaners movements and trajectory throughout its cycle.
The unit will determine the type of finish in the pool (liner, ceramic, concrete) adapting the working rhythm of the pump, preserving its lifespan. If the unit comes across a difficult spot (grease, smooth patch on liner...) during its cycle, it will accelerate and move along quickly through the difficult zone.
The unit gauges automatically its duration of cycle, time spent on waterline in comparison to the walls and bottom surface optimising time spent. The algorithm corrects and balances the rotations of the cleaner clockwise and anti-clockwise avoiding a tangled cable.
The Aquabot Bravo pool cleaner is delivered with transportation trolly, low current transformer and 1 filtration bag.
For pools with a compact filtering unit
Check the space situated between the immersed section of the compact filter and the bottom surface of your pool is deep enough to accommodate the cleaners movement, avoiding the cleaner to be "stuck" during its cycle.
See the whole Aquabot range Aquabot range
Price incl. VAT
Ask for a free quote aquabot bravo electric pool cleaner
Other product : Aquabot Bravo electric pool cleaner
At best price 739 eur Including VAT.
Please fill in this form carefully. Our commercial service will handle your request promptly.
UK freephone hotline
Monday Friday 9.00 19.00, Saturday 10.00 18.00