699€
Aquatron (aquabot) pool cleaners
Intelligent generation of pool cleaners with detection function determining pool dimensions and auto protection system. Aquabot is a Aquatron brand name.
Aquatron is a worldwide leader in the construction and distribution of pool cleaners.
The range of products includes Aquabot Bravo and Aquabot Viva for residential pools, UltraMax and Magnum for public pools.
Aquatron is a worldwide leader in the construction and distribution of pool cleaners.
The range of products includes Aquabot Bravo and Aquabot Viva for residential pools, UltraMax and Magnum for public pools.
The Aquatron pool cleaners feature a intelligent protection system :
If the unit is put into action out of the water, the automatic security mode protects the whole of the unit including pump and current transformer...
If the low current transformer is put into use without the pool cleaner it is automatically stopped after 10 to 15 seconds.
For pools featuring an immersed border (or a Californian border), the pool cleaner inverses its movement as soon as it emerges when reaching the waters edge. In the case that the unit does not return into the water, it automatically goes to security mode, (including its low current transformer).
If the cleaner meets an obstacle in its path (ladder, lamp, discharge nozzle, pool cover or any other horizontal or vertical object) the cleaner is programmed to move around the obstacle in question and continue its cycle.
If an obstacle becomes stuck between the body of the unit and it's brush (towel, cable...), the unit will try to distance the object in question to continue its cycle. If this fails, the pool cleaner (including its transformer) will adopt security mode automatically.
If the pool cleaner turns over and cannot continue its movements, the pump will operate for 5 seconds. The drive system will forward/reverse and then go to security mode.
The Aquabot Bravo uses a microprocessor programmed with an algorithm studied to protect and optimise its use.
From the moment it is switched on, the cleaner will detect the walls and waterline, defining the profile of the pool it will clean.
The intelligent algorithm will optimise the cleaners movements and trajectory throughout its cycle.
The unit will determine the type of finish in the pool (liner, ceramic, concrete) adapting the working rhythm of the pump, preserving its lifespan.
If the unit comes across a difficult spot (grease, smooth patch on liner...) during its cycle, it will accelerate and move along quickly through the difficult zone.
The unit gauges automatically its duration of cycle, time spent on waterline in comparison to the walls and bottom surface optimising time spent. The algorithm corrects and balances the rotations of the cleaner clockwise and anti-clockwise avoiding a tangled cable.
If the unit is put into action out of the water, the automatic security mode protects the whole of the unit including pump and current transformer...
If the low current transformer is put into use without the pool cleaner it is automatically stopped after 10 to 15 seconds.
For pools featuring an immersed border (or a Californian border), the pool cleaner inverses its movement as soon as it emerges when reaching the waters edge. In the case that the unit does not return into the water, it automatically goes to security mode, (including its low current transformer).
If the cleaner meets an obstacle in its path (ladder, lamp, discharge nozzle, pool cover or any other horizontal or vertical object) the cleaner is programmed to move around the obstacle in question and continue its cycle.
If an obstacle becomes stuck between the body of the unit and it's brush (towel, cable...), the unit will try to distance the object in question to continue its cycle. If this fails, the pool cleaner (including its transformer) will adopt security mode automatically.
If the pool cleaner turns over and cannot continue its movements, the pump will operate for 5 seconds. The drive system will forward/reverse and then go to security mode.
Intelligent pool type detection system
The Aquabot Bravo uses a microprocessor programmed with an algorithm studied to protect and optimise its use.
From the moment it is switched on, the cleaner will detect the walls and waterline, defining the profile of the pool it will clean.
The intelligent algorithm will optimise the cleaners movements and trajectory throughout its cycle.
The unit will determine the type of finish in the pool (liner, ceramic, concrete) adapting the working rhythm of the pump, preserving its lifespan.
If the unit comes across a difficult spot (grease, smooth patch on liner...) during its cycle, it will accelerate and move along quickly through the difficult zone.
The unit gauges automatically its duration of cycle, time spent on waterline in comparison to the walls and bottom surface optimising time spent. The algorithm corrects and balances the rotations of the cleaner clockwise and anti-clockwise avoiding a tangled cable.
Photos non-contractual
Ask for a free quote aquatron (aquabot) pool cleaners
Other product : Aquatron (aquabot) pool cleaners
Starting from 699 eur Including VAT.
Please fill in this form carefully. Our commercial service will handle your request promptly.
UK freephone hotline
Monday Friday 9.00 19.00, Saturday 10.00 18.00
Spare parts order
You are looking for a spare part for «Aquatron (aquabot) pool cleaners» ?
Please click the button below. Our commercial service will handle your request promptly.
