Aquabot Super Bravo

Aquabot Super Bravo electric pool cleaner in detail

The Aquabot Super Bravo pool cleaner is designed to brush, suction and clean debris and dirt on pool floors, walls and waterline of pools with maximum dimensions of 12 x 6m.

The Aqua Smart system cleans the pool in optimal time. 3 programs are available:1h for the quickest cycle, 1h30 or 2h for a deep clean.

Its high-density PVA brushes combine long life with adhesion.

The Aquabot Super Bravo does not feature onboard electronics. Using its Aquacontrol communication system, the system is totally controlled via the low current transformer, limiting maintenance to a minimum.

This allows the user to adjust the Super Bravo cleaners settings quickly and easily, optimising the pools cleaning cycle.

The Aquabot Super Bravo equally features a warning light on the transformer that indicates filter bag clogging.



The Aquabot Super Bravo with remote control uses new technology to ensure efficient modification of trajectory: A differential ensures the even rotation of the cleaner, distributing motricity to each traction chain. This new technology avoids the use of an additional motor or pivot that could make the pool cleaner more fragile.

Equipment

High-density PVA brushes are adapted to all pool finishes (concrete, liner, reinforced PVC, mosaic, polyester shell...), allowing optimal trajectory and cleaning of your pool floor, walls and waterline.

Offering better resistance and superior lifespan than classic PVC brushes that can adapt to rougher surfaces.

Using a Dacron bag, the filtering capacity of the unit is close 2 microns, retaining even the finest particles, reducing the use of water treatment products.

Aquacontrol technology

Aquacontrol technology is a unique control panel that allows direct communication with the cleaner, personalising the cleaning cycle. Featuring a switch-mode power supply, the Aquabot Super Bravo transformer, unlike traditional bobbin power sources, combines a lightness in weight and better heat distribution.


This panel offers the possibility of programming different settings ensuring a constantly clean pool obtained, adapting to your needs in the most efficient manner.

You can select your made to measure cleaning program with :






Aquabot Super Bravo (1), Low tension multiprogram transformer with remote control (2), Aquabot Super Bravo motor block (3), Ultrafine 2 micron filter bag on its support (4).

Aqua Smart system

Pool cleaner with protection system

Switching on your pool cleaner out of water will put security mode into action, including the pump and low current transformer... If you switch on the low current transformer without the pool cleaner, the security mode will activate after 10 to 15 seconds.

For pools featuring an immersed beach or infinity pool, the pool cleaner inverses its movement as soon as it emerges when reaching the water's edge. In the case that the unit does not return to the water, it automatically goes to security mode, (including its low current transformer).

If the cleaner meets an obstacle in its path (ladder, lamp, a discharge nozzle, pool cover or any other horizontal or vertical object) the cleaner is programmed to move around the obstacle in question and continue its cycle.

If an obstacle (towel, cable...) becomes stuck between the body of the unit and it's brush, the unit will try to distance the object in question to continue its cycle. If this fails, the pool cleaner (including its low current transformer) will adopt security mode automatically.

If the pool cleaner turns over and cannot continue its movements, the pump will operate for 5 seconds. The drive system will forward/reverse and then go to security mode.

The Gyro system

Intelligent pool type detection system

Each pool cleaner uses a microprocessor programmed with an algorithm studied to protect and optimise its use. From the moment it is switched on, the cleaner will detect the surfaces and waterline, defining the profile of the pool it will clean. The intelligent algorithm will optimise the cleaners movements and trajectory throughout its cycle.

The unit will determine the type of finish in the pool (liner, ceramic, concrete) adapting the working rhythm of the pump, preserving its lifespan. If the unit comes across a difficult spot (grease, smooth patch on liner...) during its cycle, it will accelerate and move along quickly through the difficult zone.

The unit gauges automatically its duration of cycle and time spent on waterline in comparison to the walls and bottom surface, optimising time spent. The algorithm corrects and balances the rotations of the cleaner clockwise and anti-clockwise, avoiding a tangled cable.


The pool cleaner Aquabot Super Bravo is delivered with : 1 transportation trolley, 1 low current transformer, 1 remote control and 1 filter bag.

On option

Technical features

Pools with outboard filtration blocks

Check the depth measurement between the pools bottom surface and the deepest immersed part of your filtration block is ample to allow the easy passage of the pool cleaner in operation.

See all the pool cleaners in the Aquatron range

Warranty

3 years