Dantherm CDP 70

Dantherm CDP 70 dehumidifier
Recommended retail price 2024 starting from :
7300 €
Our Price starting from :
7300 € Including VAT
Ref. Abatik 023540
Ref. Provider CDP 70
DANTHERM CDP 70 standard dehumidifier
Capacity 4,2 l/hour,
Incorporated hygrostat,
Available with integrated heating,
Remote control available on option
In stock
DANTHERM CDP 70 standard dehumidifier
Ref. Abatik 023540 Ref. Provider CDP 70
EUR 7300
7300 €
Order Free quote
DANTHERM CDP 70 dehumidifier with hot water battery
Ref. Abatik 023546 Ref. Provider CDP 70+094335
EUR 7750
7750 €
Order Free quote
DANTHERM CDP 70 dehumidifier with electric heater
Ref. Abatik 023543 Ref. Provider CDP 70+094338
EUR 7690
7690 €
Order Free quote
DANTHERM CDP 40/50/70 mounting blocks for ground installation
Ref. Abatik 023548 Ref. Provider 094342
EUR 379
379 €
Order Free quote
DRC 1 remote control for DANTHERM CDP
Ref. Abatik 023547 Ref. Provider 093455
EUR 335
335 €
Order Free quote
The CDP has been specifically developed for spas, hammams, verandas, libraries, museums and sports facilities. In brief, this unit is suitable for any environment which requires precise humidity control and is open to the public.

Humidity present in the ambient air is suctioned by the ventilator which is integrated into the dehumidifier. Air which passes through the evaporator is cooled to below condensation point, water vapour is then condensed and evacuated. Dry air passes on the condenser, is heated and then is sent into the ambient atmosphere.
Following dehumidification treatment, ambient air temperature gains approximately 5°C.
The dehumidifier is entirely automatic. Very quiet to run and controlled by an integrated hygrostat. A digital control panel clearly shows operational modes. Easy to maintain, just lift off the front panel to clean the air filter.
Operational schema dehumidifier

The CDP 70 ambient dehumidifier for pools can be equipped with a heater or hot water battery which can be connected to a domestic boiler or heat pump.

Remote control

The CDP 70 dehumidifier can also be equipped with a wireless remote control that indicates the humidity rate and temperature of the room.
The DRC1 distance control unit features an "installation mode" that can regulate heating system temperature and evacuating ventilation. It is also possible to connect the distance control unit to the CDP dehumidifier printed circuit board.
If the model you have chosen has featured heating, the ventilator automatically starts when the heater starts.
The distance control can be "locked" to avoid any unwanted modification to your settings.
Remote control for Dantherm CDP dehumidifiers

DANTHERM CDP 40/50/70 ground mount legs

(on option)
The CDP 70 dehumidifier has been designed for wall mount. You can, however, choose to install on ground level if wall mounting cannot be envisaged in the room that requires dehumidification. If this is the case, use the DANTHERM CDP ground mounting blocks, available on option.
Ground mount legs for DANTHERM CDP 40 standard dehumidifier

Dimensions CDP 70 dehumidifier

Technical characteristics

CDP 70
Air flow
Power supply
230 V (Ph+N)
Power capacity
1,8 W
8 A
Dehumidification at 30°C - 80% H.R.
103 L/jour
Dehumidification at 28°C - 60% H.R.
69 L/jour
Dehumidification at 20°C - 60% H.R.
40 L/jour
Decibels at 1 meter
50 dBa
Cooling liquid
Quantity of gas
1,2 kg
Index of protection
(1) Hot water battery (kW)
Electric heater (kW)

(1) Information based on primary circuit water temperature at 80/60°. Ambient air 28°, relative humidity rate 60%.

Dimensions and weight

Dimensions CDP 70 dehumidifier
Depth x height x width
326 x 770 x 1495 mm
75 Kgs

Operational limits

Ambient temperature
10 - 36 °C
Ambient humidity rate
40 - 100 % H.R.

The Dantherm CDP 70 should be installed in the room which requires dehumidification at a distance greater than 2m from the pool or spa (to meet the norm C.15.100). The room can be heated by hot water battery, available on option. Humidity control for indoor pools by closed circuit dehumidification.
Dantherm CDP 70 dehumidifier
A passive defrosting system is integrated into the electronic control. A sensor situated on the unit's evaporator ensures defrosting only when required. When in defrost mode, the compressor stops and the ventilator sends ambient air onto the evaporator, which is, in turn, defrosted.
The CDP 70 operates automatically by electronic control and incorporated hygrostat. The hygrostat is factory set to a relative humidity rate of approximately 60%.
The digital control panel indicates various unit status:
1. The unit is connected to its power source
2. Dehumidification - the compressor is in operation
3. Cooling circuit error - the dehumidifier is not in operation
4. The heating battery is connected (for models which feature hot water battery)
DANTHERM CDP 40 built in dehumidifier control pictograms


High-quality product
Bodywork made from galvanised steel, painted on inner and outer surfaces.
Low energy consumption
Rotary compressor and radial ventilator.
Very quiet in operation
50 decibels measured at 1 meter from the dehumidifier.


2 years

Photos non-contractual
Price incl. VAT

Ask for a free quote dantherm cdp 70

Other product : Dantherm CDP 70
Starting from 7300 eur Including VAT.

Please fill in this form carefully. Our commercial service will handle your request promptly.

UK freephone hotline

Monday Friday 9.00 19.00, Saturday 10.00 18.00

contact tel


Spare parts order

You are looking for a spare part for «Dantherm CDP 70» ?

Please click the button below. Our commercial service will handle your request promptly.