FORMENTERA, polyester shell pool

Our pool solutions

Polyester shell pools

FORMENTERA

Printable
Version

Recommended retail price 2020 starting from :

16990 €

Our Price starting from :

14990 € Including VAT

Ref. 010158
Formentera 9.50x4.05 polyester shell pool with sand filter

Oval polyester shell pool with dimensions of 9,50x4,05m,
Gently sloping floor up to 1,71m in depth,
Integrated balneo unit in bench

In stock

Formentera 9.50x4.05 polyester shell pool with sand filter
Ref. 010158

14990 €

White coping for Formentera 9.50x4.05 polyester shell pool
Ref. 010157

1990 €

Beige coping for Formentera 9.50x4.05 polyester shell pool
Ref. 019306

1990 €

The MANCORA pool in detail

Attractive and original, the FORMENTERA pool shell's design features curved lines and is one of the largest pools in our range. It boasts 9,50 m in length and a little more than 4m in width.
This model's integrated stairs and bench offers maximum enjoyment of the sun and easy pool access.
The gently sloped floor allows gentle entry to the deep end which reaches 1,71m in depth.
Total water volume does not exceed 50m3, allowing you to heat easily your pool water, limiting heating costs.

The monobloc structure coupled with the quality of materials used for manufacture guarantees perfect watertightness, flexibility and resistance.
Each model is available with sand or cartridge filtration system, depending on your requirements and volume of pool water.

.
Monobloc pool moulded from a polyester resin reinforced with glass fibres. A gel coat (a synthetic resin which gives a "gloss" finish) is then applied.
Because of its monobloc structure and quality materials used, the pool shell is perfectly watertight.
This type of pool proves to be highly resistant to an aggressive environment (UV, weather conditions, chemical water treatment ...).

FORMENTERA 950

The 950 model features a large volume of water and features stairs, balneo and hydro-massage units integrated to the bench. This constitutes a relaxation zone for you to enjoy between family and friends.

FORMENTERA 950

Dimensions in mm

Features

Model

FORMENTERA 950

Dimensions

9,30 x 3,20-3,60 x 1,15-1,71 m

Volume

44 m³

Gradient

989

Filtration

14/15 m³/h

Pump

1HP

Diameter of filter

600

Filtration system

The FORMENTERA is delivered with a filtration system that includes :

ESPA SILEN 100 1HP pump

The SILEN impeller centrifugal pump is self-priming, compact and compatible with salt water treatments and has been designed for the filtration of residential pools.
Supplied with 50 mm union connections on the pump's inlet and outlet, a purge cap, large capacity pre-filter complete with a transparent lid featuring an anti-blocking system.
The SILEN also features internal thermal protection.
The body, floor and diffuser of the pump are made from polypropylene reinforced with glass fibre. Its rotor is made from Noryl® reinforced with glass fibres. Supports are made from polyamide reinforced by glass fibre. The motors axis is made from AISI 420. O-rings from NBR. Mechanical seals made from graphite-alumina. L-2521 aluminium motor body. Bobbin impregnated with epoxy varnish.

Dimensions ESPA SILEN 100 1HP pump

ASTRAL VESUBIO 600 sand filter

Dimensions ASTRAL VESUBIO 450 side sand filter

• Filters constructed using the simultaneous projection of glass fibres and resin.
• Equipped with collectors and diffusers made from inalterable PVC.
• Manometer, air and water purge supplied.
• 6-way valve to effectuate filtration, wash, rinse, recirculate, purge and close.
• Maximum working pressure 2kg/cm².
• Service pressure 3kg/cm².

Diameter filter F (in mm)

600

A (in mm)

325

B (in mm)

125

C (in mm)

865

D (in mm)

400

T (in mm)

200

Connections

1 ½"

Filter recharge (in kg)

148

Dimensions ASTRAL VESUBIO 600 filter

Included equipment

** Skimmer
* Discharge nozzles
* Main drain
* Brush adaptor

* Reinforcing trusses
* Filter
* Pump

Global schema

Installation schema Fuerteventura polyester shell pool

Manufacturing process

The greatest care and attention is given to the manufacturing process of our pools to guarantee quality and long life.
The gelcoat is resistant to UV rays and weather conditions, providing a perfect finish for your pool. Watertight and resistant, the gel coat is easy to clean and it's smooth, glazed aspect can avoid algae development on pool walls.