SAMANA

Recommended retail price 2021 starting from :
8990 €
Our Price starting from :
8990 € Including VAT
Ref. 010162
Samana polyester shell pool 4.91x2.77 - sand filter
Samana polyester shell pool 4.91x2.77 - sand filter
Polyester shell pool with gently sloped floor,
2 available lengths ranging from 4,91m to 6,29m
2 available lengths ranging from 4,91m to 6,29m
In stock
SAMANA pools
Original, compact design allow the SAMANA polyester shell pool to be installed in most gardens.
SAMANA 480 features central stairs and a relaxation bench.
SAMANA 620 features a large bench, angled stairs and a "relaxation armchair".
.
Each model is factory moulded as a monobloc with a quality finish. The manufacturing materials used offer perfect resistance, sealing and flexibility.
The Samana is available with sand or cartridge filtration depending on your preference.
Monobloc pool moulded from a polyester resin reinforced with glass fibres. A gel coat (a synthetic resin which gives a "gloss" finish) is then applied.
Because of its monobloc structure and quality materials used, the pool shell is perfectly watertight.
A polyester shell pool proves to be highly resistant to an aggressive environment (UV, weather conditions, chemical water treatment ...).

SAMANA 480 polyester shell pool


Dimensions in mm

SAMANA 620 polyester shell pool


Dimensions in mm
Polyester pool characteristics
Model | SAMANA 480 | SAMANA 620 |
Dimensions | 4,55 x 2,40 x 1,17/1,26 m | 5,95 x 2,80 x 1,15/1,28 m |
Volume | 16,2 m³ | 18,6 m³ |
Slope | 2% | 2% |
Weight | 305 | 415 Kg |
Pump | 0,75 HP | 0,75 HP |
Filter diameter | 500 | 500 |

SAMANA 620 polyester shell pool stairs
Filtration
SAMANA polyester shell pools are supplied with a sand filtration system featuring :
ESPA SILEN 75 3/4 HP pump

The SILEN impeller centrifugal pump is self-priming, compact and compatible with salt water treatments and has been designed for the filtration of residential pools.
Supplied with 50 mm union connections on the pump's inlet and outlet, a purge cap, large capacity pre-filter complete with a transparent lid featuring an anti-blocking system.
The SILEN also features internal thermal protection.
The body, floor and diffuser of the pump are made from polypropylene reinforced with glass fibre. Its rotor is made from Noryl® reinforced with glass fibres. Supports are made from polyamide reinforced by glass fibre. The motors axis is made from AISI 420. O-rings from NBR. Mechanical seals made from graphite-alumina. L-2521 aluminium motor body. Bobbin impregnated with epoxy varnish.
Supplied with 50 mm union connections on the pump's inlet and outlet, a purge cap, large capacity pre-filter complete with a transparent lid featuring an anti-blocking system.
The SILEN also features internal thermal protection.
The body, floor and diffuser of the pump are made from polypropylene reinforced with glass fibre. Its rotor is made from Noryl® reinforced with glass fibres. Supports are made from polyamide reinforced by glass fibre. The motors axis is made from AISI 420. O-rings from NBR. Mechanical seals made from graphite-alumina. L-2521 aluminium motor body. Bobbin impregnated with epoxy varnish.

Dimensions ESPA SILEN 75 3/4 HP pump
ASTRAL VESUBIO 500 sand filter


• Filters constructed using the simultaneous projection of glass fibres and resin.
• Equipped with collectors and diffusers made from inalterable PVC.
• Manometer, air and water purge supplied.
• 6-way valve to effectuate filtration, wash, rinse, recirculate, purge and close.
• Maximum working pressure 2kg/cm².
• Service pressure 3kg/cm².

Dimensions ASTRAL VESUBIO 500 sand filter
• Equipped with collectors and diffusers made from inalterable PVC.
• Manometer, air and water purge supplied.
• 6-way valve to effectuate filtration, wash, rinse, recirculate, purge and close.
• Maximum working pressure 2kg/cm².
• Service pressure 3kg/cm².

Diameter filter F (in mm)
500
A (in mm)
305
B (in mm)
125
C (in mm)
765
D (in mm)
400
T (in mm)
200
Connections
1 ½"
Filtering medium (in kg)
95
Dimensions ASTRAL VESUBIO 500 sand filter
Included equipment
* Skimmer
* Discharge nozzles
* Main drain
* Brush adaptor
* Discharge nozzles
* Main drain
* Brush adaptor
* Trusses
* Filter
* Pump
* Filter
* Pump
General schema of polyester shell pool

Manufacturing process of polyester shells
Our polyester shell pools are manufactured with the greatest care to ensure the long lifespan and high-quality of your pool.
The gel-coat is resistant to weather conditions and UV rays, constituting a performant finishing coat for your pool. Watertight and resistant, the gel-coat is easy to maintain, its smooth surface can help to avoid the development of algae on pool walls.

Application of gel coat

Moulding of polyester shell

Positioning of reinforcing trusses

Unmolding of shell
Delivery of polyester shell pool
To ensure optimal installation conditions for your polyester shell pool, follow the below installation process

Excavaition

Gravel bed

Delivery of pool

Backfill

Reinforcing concrete belt installed around pool

Installation of copin
Available colours

1- Blue
2- White
3- Pale grey
2- White
3- Pale grey
4- Beige
5- Green
6- White blue
5- Green
6- White blue
7- White green
8- Mottled blue
9- Mottled white
8- Mottled blue
9- Mottled white
Available options
- Coping
- Balneotherapy
- Bubble cover
- Counter current unit
- Pool floor lighting
- Salt water treatment
Warranty
10 years on watertightness
2 years on other parts
Photos non-contractual
Price incl. VAT
Price incl. VAT
Ask for a free quote samana
Other product : SAMANA
Starting from 8990 eur Including VAT.
Please fill in this form carefully. Our commercial service will handle your request promptly.
UK freephone hotline
Monday Friday 9.00 19.00, Saturday 10.00 18.00

Spare parts order
You are looking for a spare part for «SAMANA» ?
Please click the button below. Our commercial service will handle your request promptly.