



Zodiac POWER FIRST PREMIUM heat pump

Zodiac POWER FIRST PREMIUM 11KW heat pump three-phase
Titanium exchanger
- New
- Complies with standard NF PAC
- Maximum pool volume 90 m3
- Single-phase
- Three-phase
YouTube conditions the playback of its videos on the deposit of tracers in order to offer you targeted advertising based on your browsing.
By clicking on "I authorize" the plotters will be deposited and you will be able to view the video. You have the option of withdrawing your consent at any time.
For more information, visit the YouTube cookies policy
.
This is a new range of heat pumps designed to heat outdoor in-ground, mid-level or above ground pools.
These air/water heat pumps can be used in pools with a maximum volume of 90 m3.
Advantages
- Adaptable power: 5 models ranging from 6.9 to 13,9 KW.
- Single-phase or three-phase electrical supply (230 V).
- Quiet running: very feeble noise level.
- Energetically high performance.
- European construction.
Features
Air / water monobloc heat pump.
Outdoor installation.
Anti-corrosive TITANIUM condenser.
High-performance evaporator.
Digital control with priority for water heating.
Reversible function enabling the pool water to be cooled.
Pallet rotary compressor.
Water flow detector with digital control.
HP an LP security pressure switch.
Defrosting system using automatic ventilation.
Frost protection thermostat (stops at +7 °C).
Polypropylene bodywork (anti-corrosive).
R 410 A cooling liquid.
Hydraulic PVC connections Ø 50, to be stuck with solvent cement.
Three-phase or single-phase power supply (230 V / 50Hz).
Possibility to install in the technical house (consult us)

Model | Power First Premium 6 single-phase | Power First Premium 8 single-phase | Power First Premium 11 single-phase | Power First Premium 11 three-phase | Power First Premium 13 single-phase |
Zodiac reference | W20PFPREM6M | W20PFPREM8M | W20PFPREM11M | W20PFPREM11T | W20PFPREM13M |
Conditions of use 1: Air at 15ºC/Water 24ºC/ Humidity 70% (Zodiac figures)
Model | Power First Premium 6 single-phase | Power First Premium 8 single-phase | Power First Premium 11 single-phase | Power First Premium 11 three-phase | Power First Premium 13 single-phase |
Power input (kW) | 1,5 | 1,7 | 2,2 | 2,2 | 2,9 |
Power output (kW) | 7 | 7,8 | 10,4 | 10,5 | 14 |
COP | 4,9 | 4,9 | 5 | 5 | 5,1 |
Conditions of use 2: Air at 28ºC/Water 28ºC/Humidity 80%
Model | Power First Premium 6 single-phase | Power First Premium 8 single-phase | Power First Premium 11 single-phase | Power First Premium 11 three-phase | Power First Premium 13 single-phase |
Power output (kW) | 8,4 | 9 | 13 | 13,1 | 16,1 |
COP | 5,7 | 5,6 | 5,5 | 5,6 | 5,6 |
Model | Power First 6 single-phase | Power First 8 single-phase | Power First 11 single-phase | Power First Premium 11 three-phase | Power First 13 single-phase |
Minimum water flow (m3/h) | 3 | 4 | 5 | 5 | 6 |
For pool volume* (m3) | 20 to 40 | 30 to 50 | 40 to 75 | 40 to 75 | 60 to 90 |
Friction loss (mmca) | 1,3 | 1,4 | 1,5 | 1,5 | 1,5 |
Nominal amperage (A) | 6,9 | 7,9 | 10,3 | 4,25 | 13 |
Maximum amperage (A) | 8,5 | 10 | 13,2 | 5,25 | 16,4 |
Hydraulic connections | 1/2 PVC connections Ø50 to stick | 1/2 connections PVC Ø50 to stick | 1/2 connections PVC Ø50 to stick | 1/2 connections PVC Ø50 to stick | 1/2 connections PVC Ø50 to stick |
Cable section (mm2)** | 3 x 2,5 | 3 x 2,5 | 3 x 2,5 | 3 x 2,5 | 3 x 2,5 |
Decibles (dBA)*** | 65,3 | 65,2 | 66,7 | 66,7 | 65,1 |
Decibels at 10m(dBA)*** | 37,3 | 37,2 | 38,7 | 38,7 | 37,1 |
Net weight (kg) | 51 | 52 | 63 | 63 | 68 |
* Residential pool with thermal cover, between 15 May and 15 September. Air temperature 15 º C.
** For a maximum length of 20 metres.
***Measured and certified following the norm ISO 3741 et EN ISO 354 by CTTM (Center of Transfer Technology, Le Mans, France).
Dimensions (in mm)

Dimensions (L x w x H) = 950 x 465 x 840 mm
Installation
PVC hydraulic connections, Ø50, using a by-pass from the discharge circuit (see schema)
Anticipate a distance of 50cm between the back of the heat pump and the wall.
Avoid obstacles in front of the heat pump for a distance of 4 - 5m.
Fit a 30mA circuit breaker (not included).

Installation schema
2. No surrounding obstacles for 4 to 5 m.
3. Heat pump
4. 0,50m minimum
5. Water treatment
7. Filter
8. Suction
9. Discharge
10. Hot air inlet
11. By-pass
OPTION: U-CONNECT connection kit


The U-Connect connection kit links a heat pump to your pool without labour, plumbing or tools. This quick intervention does not require a supplementary power supply and avoids the need for a by-pass. Just connect the two supplied pipes to your Zodiac Power First Premium heat pump, and link to the portable U-Connect control box. Self-priming, the U-Connect system stays independent from your filtering system. You get hot water, faster, without losing heat through piping as is often the case in a classic configuration.
Price incl. VAT
Ask for a free quote zodiac power first premium heat pump
Other product : Zodiac POWER FIRST PREMIUM heat pump
Starting from 4926 eur Including VAT.
Please fill in this form carefully. Our commercial service will handle your request promptly.
UK freephone hotline
Monday Friday 9.00 19.00, Saturday 10.00 18.00

Spare parts order
You are looking for a spare part for «Zodiac POWER FIRST PREMIUM heat pump» ?
Please click the button below. Our commercial service will handle your request promptly.