>> Automatic pool cleaners Electric pool cleaners Aquabot Ultra 500 electric pool cleaner for public pools

Aquabot Ultra 500 electric pool cleaner for public pools

Aquabot Ultra 500
Recommended retail price 2024 :
3770 €
Our Price :
3770 € Including VAT
Delivery charges +90.00 €
Ref. Abatik 020489
Ref. Provider 49636
Aquabot ULTRA 500 electric pool cleaner with transportation trolley
EUR 3770.00
For pools up to 25m in length,
Cleans bottom surface,
Transportation trolley and remote control,
3 cleaning cycles 3, 4 and 5 hours,
Remote control and transportation trolley
User friendly
In stock
The Ultra 500 from the Aquabot range is specifically designed for public pools up to 25 m in length. Powerful and efficient, this unit optimises the cleaning of the bottom surface of your pool. Using the Aqua Smart System technology, the movements of your cleaner are optimised and predefined in coherence with the dimensions of your pool ensuring a quick and efficient clean. It's double rang of PVA foam brushes guarantee perfect cleanliness.

Aquabot 500 large view

Operation



The Aquabot Ultra 500 particularly adapts to large sized pools. Using a flow of 22 m³ of water per hour generated by its powerful suction motor. The Aquabot 500 is equipped with 2 traction motors that ensure a fluid and fast trajectory covering a distance of 16 m/min.

For fast and efficient cleaning, the pool cleaners movements are defined by Aqua Smart System technology. This patented technology pre defines the trajectory of the cleaner predefined in coherence with the dimensions of your pool, to ensure:

- Avoiding unnecessary movements
- Cleaning the pool as a whole
- Calculating the trajectory to avoid the cable becoming tangled

The Aquabot Ultra 500 proposes 3 cleaning programs to choose from depending on your pool: 3h, 4h or 5 h.
Delivered with a wireless remote control (1), control box (3) connected to power supply (2). The Aquabot Ultra 500 pool cleaner (5) is connected to the control box via its 30m floating cable (4).
Operation Ultra 500

How to use your pool cleaner



Before placing your pool cleaner in the water, check that the transformer is not connected to the power supply. The transformer must be placed at a distance of at least 3.6m from the edge of your pool and, at least, 12cm from ground level.

1) Unroll the floating cable
2) Grasp the unit by it's handle and place it in the water. Use a to and fro movement to evacuate trapped air and let the unit drop to the bottom surface of the pool.
3) Connect the pool cleaner to its transformer.
4) Connect the transformer to the power supply.
5) Define the cleaning cycle using the control panel and switch on. The robot Aquabot Ultra 500 begins its cycle. Once the cycle is finished the unit automatically goes to standby mode.
How to use the Ultra 500

The control box

Control box interface Ultra 500
The control box of the Aquabot Ultra 500 uses simple and functional control allowing you to program your settings and follow operation.

This control panel has many features each associated with a lighted, visual signal :
1
Obstacle detection
2
Electronic system that avoids cable twisting
3
Programming in coherence with the shape and size of your pool to optimise the cleaning cycle
4
Choice of cleaning cycle
5
Selection of cleaning level : light, normal and deep clean
6
Full filter alert
7
Internal time clock


Wireless remote control


The remote control allows you to control in real-time the trajectory of the unit by means of a multi-directional radio transmission.
Using the commands left/right/forwards/backwards you to control the unit and guide it towards a zone that requires particular attention during its filtering cycle.

1 - Go left
2 - Forwards/backwards
3 - Go right
Remote control operation Ultra 500
Remote control Ultra 500


Filter care


Caring for the Aquabot Ultra 250 filter requires little maintenance and manipulation. If the unit is still in the water ensure that the power supply is disconnected. Gently pull the cable, guiding the unit to the pool-side and remove from water using its handle. You can access the filter by removing the lid situated on the undercarriage.

The filter should be rinsed in clear water, without any detergent or product. It is possible to wash by machine without using detergent.

Filter Care Ultra 500
1 - Remove the lid
2 - Remove the filter from its support frame
3 - Wash the filter
4 - Replace the filter on its support frame

Features


Shape of pool
Rectangular, round, oval or specific shape
Pool finish
All types
Maximum length
25 m
Speed
16 m/min, 580 m²/h
Filtration
Reusable bag with a capacity of 11,520 cm²
Access to filter
Easy opening lid on undercarriage (Bottom Access)
Filter flow
16 m³ /h
Suction motor
24 V DC
Cleaning cycles
3, 4 or 5 hours
Areas cleaned
Suctions and cleans the bottom surface
Brush type
PVA foam double rang
Remote control
Yes (range of 30 m)
Length of floating cable
30 metres*
Net weight
40 kilos
Transportation trolley
Yes


Ultra 500 in detail
Handle facilitating entry and exit from water
Optimised trajectory with Aqua Smart System
Delivered with transportation trolley

Warranty

2 years

Photos non-contractual
Price incl. VAT

Ask for a free quote aquabot ultra 500 electric pool cleaner for public pools

Other product : Aquabot Ultra 500 electric pool cleaner for public pools
At best price 3770 eur Including VAT.

Please fill in this form carefully. Our commercial service will handle your request promptly.


UK freephone hotline

Monday Friday 9.00 18.00

contact tel