MODULABRI low modular pool enclosure

Modulabri low pool enclosure
Recommended retail price 2024 :
7540 €
Our Price :
7540 € Including VAT
Ref. Abatik 006898
Ref. Provider modulabri 2
Modulabri low pool enclosure in anthracite 633x330cm
EUR 7540.00
Low pool enclosure self-assembly kit,
Pool water naturally heated by the sun's energy all year round,
Maximum protection and security for your pool area
  • Complies with standard NF P 90-309
In stock
Modular, low pool enclosure for maximum pool dimensions between 3.00 x 3.00 m to 5.30 x 10.40 m.
Inner pool dimensionsOuter pool dimensionsPrice incl VAT*Promotional price valid till 31/05/17*
6 m x 3 m6,33 m x 3,30 m7540€ incl VAT5690€ incl VAT
8 m x 4 m8,44 m x 4,30 m9780€ incl VAT7240€ incl VAT
10 m x 5 m10,55 m x 5,30 m11730€ incl VAT8690€ incl VAT

* Above prices with departure from manufacturer.

A minimum of two persons are required to reception delivery.
Other dimensions are available, contact us on
International phone contact

MODULABRI low modular pool enclosure in detail


This enclosure is ideal for residential pool owners who wish to equip their pool with a discreet, flat pool enclosure which offers a lengthened swimming season, in total security.

It's slim, rounded structure adapts perfectly to your pool as it is made to measure.

Sun rays are captured and redistributed during the coolest periods of the day or season. Pool water is heated faster and more easily.

Conforming to the norm NF P 90-309, the MODULABRI low pool enclosure guarantees pool inaccessibility when not in use using the featured key lock. This avoids a falling risk to animals, children etc.

Advantages


Swim under your enclosure
The rounded shape of this enclosure's structure allows pool use while the enclosure is in place. Lengthen your swimming season and fully enjoy your pool in total security.

Pool enclosure without rails
No rails are required to open or close this enclosure's modules. This system has the advantage of avoiding the accumulation of dirt, such as leaves, debris, dust...) inside the rail.

Easy to use
The modules which compose the enclosure are manually superposed on ending sections to ensure maximal insulation. Their structure is slightly curved to avoid stagnating water.

Even better
Made in France and guaranteed for 2 years. The enclosures structure, made from polycarbonate and aluminium, benefits from a 10-year guarantee for total peace of mind.

Offers multiple configurations



Depending on ambient outdoor temperature and your pool use, several configurations are possible:

- Open one module, situated on the width of the pool. Practical to access steps, skimmers and all other technical material such as projectors, etc...

- Lift one or several modules on either side of the pool. A pair of 1.80 m supporting struts with ground blocking system equips each module.

- Lift all the modules. Manipulation is completed in only a few minutes, the modules can be stored at the end of the pool.

Lengthens your swimming season


This enclosure provides a temperature gain of 6 to 8 degrees.
You can swim for longer, more often:
- Early morning or evening when the ambient temperature is cooler, as water keeps the calories accumulated during the day.
- All year round using the heat provided by the sun's rays.

The black curve depicts water temperature without the use of a pool enclosure. The red depicts water temperature without the use of a pool enclosure.
Water temperature graph

Adapted to all pool configurations


MODULABRI pool enclosure is composed of a maximum of 5 modules. Each module is independent, easily moved and replaced.

Modules measure 2,11m in length. To meet the specific need of your pool configuration, made to measure adaptations can be made to the width and length of the enclosure.

The ground implantation system is movable and automatic, guiding, aligning and maintaining the modules in the correct position.

The wheel system offers easy gliding of the elements on the ground surface.

Modulabri low pool enclosure in open position
Modulabri low pool enclosure with wooden deck


Modulabri low pool enclosure showing 2 open modules
Modulabri low pool enclosure   1 open module


Easy to install and use


This enclosure has been designed to be easily installed by 2 persons, in 6/8 hours approx.

Required material


- automatic screwdriver
- hammer drill
- 5mm allen key
- measuring tape
- mallet (wooden or plastic)
- cutter
- 10 and 12 mm concrete drill bit
- 10 mm wooden drill bit
- 12 mm milling cutter for wood

Supplied material


- hardware
- rawlplugs
- stoppers
- joinery concealers
- connecting profiles
- connection parts required for the assembly of larger sections
- locking wheels
- key lock
- strap kit to secure modules when stacked

Our advice: place a cover or other protective element on the ground surface when working to avoid friction damage.

Modulabri low pool enclosure

A system which guarantees optimised security


Conform to the norm NF P 90-309, MODULABRI low pool enclosure is equipped with a key lock system. To access the pool water, the enclosure's locking wheels must be released. One is locked by key. The modules can be lifted using manual support struts.
(Available on option : motorised support struts).

Notches at the end of each module allow easy fitting of foot plates.

Modules are lifted and moved using the integrated handles inside the enclosure. The profile design allows ergonomic handling, adapted to all users.
All manipulation can be carried out without the risk of sharp or cutting edges.

Options


Motorised support struts


To free pool access effortlessly, you can equip your enclosure with a motorised system to lift your modules.

The system "Lift Up" avoids any difficulty linked to lifting your modules due to weight, putting struts into position etc. One person can complete manipulation in just a few seconds.
Lift Up motorised system

Technical charateristics


Componants


- The enclosure of the structure is made from certified
initial amalgamation"Qualimarine" aluminium
- Colour: grey RAL 9007, certified "Qualicoat"
- Polycarbonate panels leaf enclosed in the aluminium frame structure. This finish avoids the intrusion of any outside dirt or debris and ensures inner ventilation of the panel.
- The finishing parts are made from thermo-vulcanised plastic (mix of polyamide and glass fibre)
- Brass expansion plugs
- Stainless steel locking wheels
- EPDM seals and apron

Structure material
Thermolaquered aluminium
Profile section
2.11m
Structure colour
Anthracite grey (ral 9007)
Panels
Multi-wall polycarbonate - 8mm
Guiding system
Nylon wheels on ground level, without the use of rails
Available options
Extension for stairs at pool end, electric supporting struts
Packing and transport
Enclosure delivered as a kit, delivery must be receptioned by 2 - 3 persons

Warranty

10 years on structure
2 years on all other material

Photos non-contractual
Price incl. VAT

Ask for a free quote modulabri low modular pool enclosure

Other product : MODULABRI low modular pool enclosure
At best price 7540 eur Including VAT.

Please fill in this form carefully. Our commercial service will handle your request promptly.


UK freephone hotline

Monday Friday 9.00 19.00, Saturday 10.00 18.00

contact tel


 

Spare parts order

You are looking for a spare part for «MODULABRI low modular pool enclosure » ?

Please click the button below. Our commercial service will handle your request promptly.