PH Regulus peristaltic dosing pump

pH Regulus peristaltic dosing pump
Recommended retail price 2024 starting from :
720 €
Our Price starting from :
679 € Including VAT
Ref. Abatik 000555
Ref. Provider 070 AA
pH REGULUS PP set flow 1,5l/h
Injection of pH+ or - correction liquid,
Separate control module and dosing pump,
For pools up to 500m³,
Display of water temperature,
Backlit LCD screen,
Kit ready to install
Command module and probe factory tested and calibrated
pH REGULUS PP set flow 1,5l/h
Ref. Abatik 000555 Ref. Provider 070 AA
EUR 679
679 €
Out of stock Free quote
REGULUS EM with electro magnetic pump 10L/H and water temperature sensor
Ref. Abatik 011487 Ref. Provider 070 AF
EUR 999
999 €
Out of stock Free quote
REGULUS VENTURI dosing pump
Ref. Abatik 002040 Ref. Provider 070 AH
EUR 779
779 €
Out of stock Free quote
Dry run sensor option for dosing pump
Ref. Abatik 011477 Ref. Provider 070 SE
EUR 199
199 €
Out of stock Free quote
REGULUS EM with electro magnetic pump 5L/H water temperature sensor
Ref. Abatik 007359 Ref. Provider 070 AE
EUR 749
749 €
Out of stock Free quote
REGULUS PP variable flow 0,5 to 7L/h
Ref. Abatik 011488 Ref. Provider 070 AB
EUR 749
749 €
Out of stock Free quote
Regulus is a patented pH regulation system adapted to all pool dimensions up to 500m³.

It integrates a command module and peristaltic dosing pump or alternatively, an offset electromagnetic pump depending on the size of the pool. A variable flow provides a better precision of liquid injection.

Innovating, this system allows the choice of a better-adapted configuration for your pool and facilitates maintenance operations.

Regulus is supplied with a water temperature sensor and backlit LCD screen.

pH regulation
Water pH is a determining factor concerning your pool water quality which is often neglected. It is the correct pH balance which keeps your water pure, limpid and healthy, also optimising disinfectants.

pH variation is linked to many parameters: swimming frequency, type and quality of your water and treatment method used... Which is why it is important to keep pH in the correct, balanced range (7.0-7.4).
PH Regulus peristaltic dosing pump

The Regulus dosing pump measures the pH level in your pool while the filtration system is in operation. If the pH level is not within the desired working range, the dosing pump is activated and sends correction liquid (pH + or -) to the pool water by means of proportional dosing, avoiding the handling of dangerous basic or acidic chemical products.

Regulus displays the various settings and modes available : pH measured, working range, temperature, error warnings (pH probe error, over dosing, under dosing) and automatic calibrating of the probe.

Regulus PP with automatic calibrating of the probe


PH Regulus peristaltic dosing pump

2 types of peristaltic pumps available :

Set flow

Flow
Set between 1,5l/h and 1,5 bars
Tube
Santoprene (long life)
Recommended for
Residential pools up to 150m³ maximum

Spacer 250
Variable flow

Flow
Variable between 0 and 100%, maximum 7l/h at 1,5 bars
Tube
Santoprene (long life)
Recommended for
Residential pools up to 300m³ or public pools up to 250m³

Regulus EM with electromagnetic pump


PH Regulus peristaltic dosing pump

2 configurations are possible :

1 pump for a variable flow of 5l/h

Flow
Variable between 0 and 100%, maximum 5l/h at 5 bars
Tube
Santoprene (long life)
Recommended for
Residential or public pools up to 250m³

2 pumps for a variable flow of 10l/h

Flow
2 variable pumps 2 x 5l/h at 5 bars
Tube
Santoprene (long life)
Recommended for
Residential or public pools up to 500m³


A dry run sensor is strongly recommended.

Regulus with Venturi effect injection


PH Regulus peristaltic dosing pump
Automatic Venturi system without dosing pump, using 24V electro valve, recommended for all residential or public pools and spas.

The Venturi injector is installed using a bypass. The water inlet (1) creates a depression and provokes suction of the product into the hydraulic circuit (2), into the pool (3).

When the Regulus module detects that the pH level in the pool corresponds to the correct working range, the electro valve stops suction.

Installation schema


Regulus with dosing pump
PH Regulus peristaltic dosing pump

1. Power supply
2. Regulus module
3. Pool pump
4. Temperature probe
5. Pool filter
6. pH probe, installed in analysing chamber (available on option)
7. Pump (peristaltic module)
8. Suction of pH + or - correcting liquid
9. Injection of pH + or - liquid
10. Discharge towards pool

Regulus with electro valve and Venturi effect injection
PH Regulus peristaltic dosing pump

1. Power supply
2. Regulus module
3. Pool pump
4. Temperature probe
5. Pool filter
6. pH probe installed in an analysing chamber (on option)
7. Electro valve
8. Anti-return valve
9. Venturi effect injection
10. pH liquid
11. Discharge towards pool

Technical features


Display
Water balance information and errors
Norm
IP65 dosing pumps
Kit
Delivered ready to install
Installation
Factory settings, installation to all existing hydraulic systems in a few moments.

The kit includes :


- 1 pH module with LCD screen showing error signals and offset pump (you can choose from : peristaltic with a set or variable flow or electro magnetic with an adjustable flow ) (1) or 1 electro valve with Venturi effect injection.
- 1 pH probe, calibrated before dispatch (2),
- 1 probe support,
- 1 injection tube and 50 or 63mm paddle clamp (depending on model or defined when ordering) (3),
- Anti-return valves ensuring safe injection of product (4),
- 1 water temperature probe (5)
PH Regulus peristaltic dosing pump

Optional accessories


- Analysing chamber

The Analysing chamber and probe holder holds and protects the sensor that analyses your pool water. When using an analysing chamber, the probe is always in an aquatic environment, lengthening its lifespan. A probe kept in an analysing chamber can be used for up to 4 years compared to 1 to 2 years without.


Single model

- Connection kit 50 or 63mm for analysing chamber..
- Dry run sensor compatible with electro magnetic pumps..
Dry run sensor


The Regulus modules and sensors are tested and calibrated at factory settings before being sent to you. You will receive it ready to use.

Warranty

2 years excepting wear and tear parts

Photos non-contractual
Price incl. VAT

Ask for a free quote ph regulus peristaltic dosing pump

Other product : PH Regulus peristaltic dosing pump
Starting from 679 eur Including VAT.

Please fill in this form carefully. Our commercial service will handle your request promptly.


UK freephone hotline

Monday Friday 9.00 19.00, Saturday 10.00 18.00

contact tel


 

Spare parts order

You are looking for a spare part for «pH Regulus peristaltic dosing pump» ?

Please click the button below. Our commercial service will handle your request promptly.