DANTHERM CDP 50
Recommended retail price 2024 starting from :
5490 €
Our Price starting from :
5490 € Including VAT
Ref. Abatik 023539
Ref. Provider CDP 50
DANTHERM CDP 50 standard dehumidifier
Ref. Provider CDP 50
DANTHERM CDP 50 standard dehumidifier
Capacity 3,2 l/h, ideal for maximum surface areas of 30 m²,
Incorporated hygrostat,
Available with integrated heating,
Remote control available on option
Incorporated hygrostat,
Available with integrated heating,
Remote control available on option
In stock
DANTHERM CDP 50 standard dehumidifier
Ref. Abatik 023539 Ref. Provider CDP 50
Ref. Abatik 023539 Ref. Provider CDP 50
5490 €
DANTHERM CDP 50 dehumidifier with hot water battery
Ref. Abatik 023545 Ref. Provider CDP 50+094334
Ref. Abatik 023545 Ref. Provider CDP 50+094334
5750 €
DANTHERM CDP 50 dehumidifier with electric heater
Ref. Abatik 023542 Ref. Provider CDP 50+094337
Ref. Abatik 023542 Ref. Provider CDP 50+094337
6099 €
DANTHERM CDP 40/50/70 mounting blocks for ground installation
Ref. Abatik 023548 Ref. Provider 094342
Ref. Abatik 023548 Ref. Provider 094342
379 €
DRC 1 remote control for DANTHERM CDP
Ref. Abatik 023547 Ref. Provider 093455
Ref. Abatik 023547 Ref. Provider 093455
335 €
The CDP has been specifically developed for spas, hammams, verandas, libraries, museums and sports facilities. In brief, this unit is suitable for any environment which requires precise humidity control and is open to the public.
Humidity present in the ambient air is suctioned by the ventilator which is integrated into the dehumidifier. Air which passes through the evaporator is cooled to below condensation point, water vapour is then condensed and evacuated. Dry air passes on the condenser, is heated and then is sent into the ambient atmosphere.
Following dehumidification treatment, ambient air temperature gains approximately 5°C.
The dehumidifier is entirely automatic. Very quiet to run and controlled by an integrated hygrostat. A digital control panel clearly shows operational modes. Easy to maintain, just lift off the front panel to clean the air filter.
Humidity present in the ambient air is suctioned by the ventilator which is integrated into the dehumidifier. Air which passes through the evaporator is cooled to below condensation point, water vapour is then condensed and evacuated. Dry air passes on the condenser, is heated and then is sent into the ambient atmosphere.
Following dehumidification treatment, ambient air temperature gains approximately 5°C.
The dehumidifier is entirely automatic. Very quiet to run and controlled by an integrated hygrostat. A digital control panel clearly shows operational modes. Easy to maintain, just lift off the front panel to clean the air filter.
The CDP 50 dehumidifier for pools can be equipped with a heater or hot water battery which can be connected to a domestic boiler or heat pump.
Remote control
(on option)The CDP dehumidifier can also be equipped with a wireless remote control that indicates the humidity rate and temperature of the room.
The DRC1 distance control unit features an "installation mode" that can regulate heating system temperature and evacuating ventilation. It is also possible to connect the distance control unit to the CDP dehumidifier printed circuit board.
If the model you have chosen has featured heating, the ventilator automatically starts when the heater starts.
The distance control can be "locked" to avoid any unwanted modification to your settings.
The DRC1 distance control unit features an "installation mode" that can regulate heating system temperature and evacuating ventilation. It is also possible to connect the distance control unit to the CDP dehumidifier printed circuit board.
If the model you have chosen has featured heating, the ventilator automatically starts when the heater starts.
The distance control can be "locked" to avoid any unwanted modification to your settings.
DANTHERM CDP 40/50/70 ground mount legs
(optional)The CDP 40 dehumidifier has been designed for wall mount. You can, however, choose to install on ground level if wall mounting cannot be envisaged in the room that requires dehumidification. If this is the case, use the DANTHERM CDP ground mounting blocks, available on option.
Technical characteristics
Model
CDP 50
Air flow
680m3/h
Electrical supply
230 V (Ph+N)
Electrical capacity
1,5 W
Amperage
6,6 A
Dehumidification at 30°C - 80% H.R.
77 L/day
Dehumidification at 28°C - 60% H.R.
52 L/day
Déshumidification à 20°C - 60% H.R.
26 L/day
Decibels measured at 1m
47 dBa
Cooling liquid
R407C
Quantity of gas
0,9 kg
Compressor
Rotary
Indice de protection
IPX4
(1) Hot water battery option (kW)
4,2
Electric heater option (kW)
3,5
(1) Information based on primary circuit water temperature at 80/60°. Ambient air 28°, relative humidity rate 60%.
Dimensions and weight
Depth x height x width
326 x 770 x 1160 mm
Weight
65 Kgs
Operational limits
Ambient temperature
10 - 36 °C
Ambient humidity rate
40 - 100 % H.R.
The Dantherm CDP 50 should be installed in the room which requires dehumidification at a distance greater than 2m from the pool or spa (to meet the norm C.15.100). The room can be heated by hot water battery, available on option. Humidity control for indoor pools by closed circuit dehumidification.
A passive defrosting system is integrated into the electronic control. A sensor situated on the unit's evaporator ensures defrosting only when required. When in defrost mode, the compressor stops and the ventilator sends ambient air onto the evaporator, which is, in turn, defrosted.
The CDP 50 operates automatically by electronic control and incorporated hygrostat. The hygrostat is factory set to a relative humidity rate of approximately 60%.
The digital control panel indicates various unit status:
1. The unit is connected to its power source
2. Dehumidification - the compressor is in operation
3. Cooling circuit error - the dehumidifier is not in operation
4. The heating battery is connected (for models which feature hot water battery)
1. The unit is connected to its power source
2. Dehumidification - the compressor is in operation
3. Cooling circuit error - the dehumidifier is not in operation
4. The heating battery is connected (for models which feature hot water battery)
Advantages
High-quality product
Bodywork made from galvanised steel, painted on inner and outer surfaces.
Low energy consumption
Rotary compressor and radial ventilator.
Very quiet in operation
47 decibels measured at 1 meter from the dehumidifier.
Warranty
2 years
Photos non-contractual
Price incl. VAT
Price incl. VAT
Ask for a free quote dantherm cdp 50
Other product : DANTHERM CDP 50
Starting from 5490 eur Including VAT.
Please fill in this form carefully. Our commercial service will handle your request promptly.
UK freephone hotline
Monday Friday 9.00 19.00, Saturday 10.00 18.00
