GALEON MD electric pool cleaner by ASTRAL

GALEON MD electric pool cleaner in detail

The GALEON MD by ASTRAL, uses AQUASMART technology, designed to brush, suction and filter debris and algae from the pool floor and waterline in pools up to 80 m².
AQUASMART technology cleans your pool in an optimal manner. It's PVA high-density brushes combine long life and adherence, offering compatibility with most pool surfaces (concrete, liner, reinforced PVC, ...).

AQUASMART system

The GALEON MD uses the AQUASMART system.
Most traditional pool cleaners require 4 to 6 hours to clean the whole pool, wasting much time on pool walls before changing direction to clean the rest of the pool. The Aquasmart system uses intelligent technology embedded in the machine's memory and can cover the whole pool area in a systematic manner, without wasting time.

This technology has several advantages :
1. Fast cleaning
2. Energy economy
3. A longer lifespan on mechanical parts with less wear and tear

Pool cleaner with protection system

If the unit is put into action out of the water, the automatic security mode protects the whole of the unit including pump and current transformer... If the low current transformer is put into use without the pool cleaner it is automatically stopped after 10 to 15 seconds.

For pools featuring an immersed border (or a Californian border), the pool cleaner inverses its movement as soon as it emerges when reaching the water's edge. In the case that the unit does not return to the water, it automatically goes to security mode, (including its low current transformer).

If the cleaner meets an obstacle in its path (ladder, lamp, discharge nozzle, pool cover or any other horizontal or vertical object) the cleaner is programmed to move around the obstacle in question and continue its cycle.

If an obstacle becomes stuck between the body of the unit and it's brush (towel, cable...), the unit will try to distance the object in question to continue its cycle. If this fails, the pool cleaner (including its transformer) will adopt security mode automatically.

If the pool cleaner turns over and cannot continue its movements, the pump will operate for 5 seconds. The drive system will forward/reverse and then go to security mode.

Intelligent pool type detection system

The Galeon MD uses a microprocessor programmed with an algorithm studied to protect and optimise its use. From the moment it is switched on, the cleaner will detect the walls and waterline, defining the profile of the pool it will clean. The intelligent algorithm will optimise the cleaners movements and trajectory throughout its cycle.

The unit will determine the type of finish in the pool (liner, ceramic, concrete) adapting the working rhythm of the pump, preserving its lifespan. If the unit comes across a difficult spot (grease, smooth patch on liner...) during its cycle, it will accelerate and move along quickly through the difficult zone.

The unit gauges automatically its duration of the cycle, time spent on waterline in comparison to the walls and bottom surface optimising time spent. The algorithm corrects and balances the rotations of the cleaner clockwise and anti-clockwise avoiding a tangled cable.

On option

Technical features

For pools with a compact filtering unit:
Check the space situated between the immersed section of the compact filter and the bottom surface of your pool is deep enough to accommodate the cleaners movement, avoiding the cleaner to be "stuck" during its cycle.

See the whole Aquatron (aquabot) pool cleaners