Aquabot Viva Pro

The robot in detail

The Aquabot Viva Pro pool cleaner features the Aquacontrol and Aqua Smart systems, designed to brush, suction and filter debris and dirt on the bottom surface, walls and waterline of pools up to 14 x 6m.

Equipped with the Aqua Smart system that allows you to clean your pool in minimal time. 3 cleaning programmes are available: 1h, 2h, or 3h to choose from depending the debris and dirt present in your pool water.

The control system is integrated into the Aquacontrol transformer featuring up to 8 settings, enabling this cleaner to efficiently reply to the cleaning requirements of the most demanding pools.

The transportation trolley assures easy manipulation and storage of your pool cleaner.

High-density PVA brushes combine long-life and adhesion. The Aquabot Viva Pro equally features a visual lighting signal that tells you when the filter bag is full and requires cleaning.



The Aquabot Viva Pro with remote control uses new trajectory technology: Using differential gear, the cleaners rotation is effectuated by the distribution of traction on each track. This new technology avoids the use of an additional motor or pivot, making the cleaner more dependable.

Features

Aquacontrol technology

The Aquacontrol system is a unique control panel that enables you to communicate directly with the pool cleaner, personalising your cleaning program.



The Aquacontrol control interface of the Aquabot Viva Pro pool cleaner gives the possibility of programming several settings, selecting the most efficient manner of cleaning your pool in coherence with your specific situation.

You can choose a made to measure clean with:






Aquabot Viva Pro pool cleaner(1), Low tension multiprogram transformer with remote control(2), Aquabot Viva Pro main body (3), Ultra fine filter bag with capacity close to 2 microns with its support (4).

Aqua Smart system

The Aquabot Viva Pro features the Aqua Smart system.
Most pool cleaners need 3 to 6 hours to clean an entire pool.

The Aqua Smart system is an intelligent function that integrates to the microprocessor of the cleaner, telling it to cover the surface of the pool in a systematic manner without losing time.

This technology offers several advantages :

1. Quick cleaning
2. Economised energy
3. Extended lifespan on mechanical parts due to less use


.

Pool cleaner with Protection

Switching on your pool cleaner out of water will put security mode into action, including the pump and low current transformer... If you switch on the low current transformer without the pool cleaner, the security mode will activate after 10 to 15 seconds.

For pools featuring an immersed border (or a Californian border), the pool cleaner inverses its movement as soon as it emerges when reaching the waters edge. In the case that the unit does not return to the water, it automatically goes to security mode, (including its low current transformer).

If the cleaner meets an obstacle in its path (ladder, lamp, discharge nozzle, pool cover or any other horizontal or vertical object) the cleaner is programmed to move around the obstacle in question and continue its cycle.

If an obstacle becomes stuck between the body of the unit and it's brush (towel, cable...), the unit will try to distance the object in question to continue its cycle. If this fails, the pool cleaner (including its low current transformer) will adopt security mode automatically.

If the pool cleaner turns over and cannot continue its movements, the pump will operate for 5 seconds. The drive system will forward/reverse and then go to security mode.

Intelligent pool type detection system

The Aquabot VIVA uses a microprocessor programmed with an algorithm studied to protect and optimise its use. From the moment it is switched on, the cleaner will detect the surfaces and waterline, defining the profile of the pool it will clean. The intelligent algorithm will optimise the cleaners movements and trajectory throughout its cycle.

The unit will determine the type of finish in the pool (liner, ceramic, concrete) adapting the working rhythm of the pump, preserving its lifespan. If the unit comes across a difficult spot (grease, smooth patch on liner...) during its cycle, it will accelerate and move along quickly through the difficult zone.

The unit gauges automatically its duration of cycle and time spent on waterline in comparison to the walls and bottom surface, optimising time spent. The algorithm corrects and balances the rotations of the cleaner clockwise and anti-clockwise, avoiding a tangled cable.


Aquabot Viva Pro pool cleaner is delivered with 1 transportation trolley, 1 transformer, 1 remote control and 2 filter bags.

Technical features

Pools with outboard filtration blocks

Check the depth measurement between the pools bottom surface and the deepest immersed part of your filtration block is ample to allow the easy passage of the pool cleaner in operation.

See all the pool cleaners in the Aquatron range

Warranty

3 years